A game studio is testing a game that uses haptic feedback to simulate the feeling of a heartbeat. The game is supposed to provide a subtle vibration pattern, but testers report that the vibration is too strong and distracting. The controller's vibration intensity is set to the default level. What is the most likely cause of this defect?

The controller's firmware is not properly limiting the vibration intensity

The controller's vibration motor is faulty and produces excessive vibration

The game's audio settings are amplifying the vibration

The game's haptic feedback settings are too high, causing the vibration to be stronger than intended

A game is being ported from PC to a console. The PC version supports a wide range of controllers, including third-party ones. On the console, the game only recognizes the official controller, and third-party controllers are not recognized even though they work in the console's system menu. What is the most likely cause of this defect?

The game is not compatible with the console

The third-party controllers are defective

The game's input handling code is not compatible with third-party controllers on the console

The console's operating system does not support third-party controllers

A tester discovers that a controller's vibration stops working after the controller has been in use for over an hour. The vibration works fine at the start of the session. What should the tester include in the defect report to describe the impact of this issue?

A suggestion to disable vibration in the game settings

A statement that the defect causes a loss of immersion and reduces the player's ability to feel in-game events

A note that the controller is likely defective and should be replaced

A list of other testers who have experienced the same issue

A QA team is testing a fighting game on a console that supports both wired and Bluetooth controllers. During a session, a tester reports that the controller disconnects randomly for a few seconds and then reconnects. The issue only happens when the tester sits close to a microwave oven that is in use. The controller works fine when connected via USB cable. What is the most likely cause of the disconnection?

Bluetooth interference from the microwave oven

The console's Bluetooth receiver is faulty

Firmware bug in the controller that causes random disconnects

The controller's battery is low and needs recharging

During a game testing session, a tester notices that pressing the shoulder button on the controller produces two different actions in the game, even though the button is pressed once. This behavior is observed consistently across multiple controllers of the same model. Which type of defect is most directly indicated by this observation?

A network latency issue causing the input to be processed twice

A display refresh rate issue causing the action to appear twice

A game logic defect where the game incorrectly interprets a single input as two actions

A firmware defect causing the button to send duplicate input signals

Certified Tester Game Testing

Domain 6Objective 2

Defects Related to the Specifics of Game Controllers CT-GAME Practice Questions (Page 4)

Part of the Game Controllers Testing domain, which makes up ~9% of our current practice bank. ISTQB does not publish an official question count, but from its 60-minute exam (~25–40 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 33 practice questions to prepare you well beyond it. (estimate)

33questions here

7free pages

8concepts

Questions 16–20

16expert · medium
A game studio is testing a game that uses haptic feedback to simulate the feeling of a heartbeat. The game is supposed to provide a subtle vibration pattern, but testers report that the vibration is too strong and distracting. The controller's vibration intensity is set to the default level. What is the most likely cause of this defect?
Select an answer first
17expert · medium
A game is being ported from PC to a console. The PC version supports a wide range of controllers, including third-party ones. On the console, the game only recognizes the official controller, and third-party controllers are not recognized even though they work in the console's system menu. What is the most likely cause of this defect?
Select an answer first
18foundation · easy
A tester discovers that a controller's vibration stops working after the controller has been in use for over an hour. The vibration works fine at the start of the session. What should the tester include in the defect report to describe the impact of this issue?
Select an answer first
19application · medium
A QA team is testing a fighting game on a console that supports both wired and Bluetooth controllers. During a session, a tester reports that the controller disconnects randomly for a few seconds and then reconnects. The issue only happens when the tester sits close to a microwave oven that is in use. The controller works fine when connected via USB cable. What is the most likely cause of the disconnection?
Select an answer first
20foundation · easy
During a game testing session, a tester notices that pressing the shoulder button on the controller produces two different actions in the game, even though the button is pressed once. This behavior is observed consistently across multiple controllers of the same model. Which type of defect is most directly indicated by this observation?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CT-GAME

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by ISTQB. “CT-GAME” is a trademark of its owner, used for identification only.

Defects Related to the Specifics of Game Controllers CT-GAME Practice Questions (Page 4)

Questions 16–20

A tester discovers that a controller's vibration stops working after the controller has been in use for over an hour. The vibration works fine at the start of the session. What should the tester include in the defect report to describe the impact of this issue?

Keep studying — Game Controllers Testing