What is the purpose of a VLAN in a FlexPod network configuration?

To encrypt network traffic between switches

To segment network traffic into separate broadcast domains

To provide redundancy for network switches

To combine multiple physical links into one logical link

A NetApp administrator is configuring a new SVM for a FlexPod. The SVM will serve NFS to VMware ESXi hosts. Which configuration is required on the SVM to allow NFS access?

Create a data LIF in the SVM's data network and enable the NFS protocol.

Create an iSCSI LIF and enable the iSCSI protocol.

Create a volume and export it via CIFS.

Assign an aggregate to the SVM and create a LUN.

After configuring a FlexPod, the administrator wants to validate the end-to-end path from a UCS server to a NetApp LUN. The server is configured to boot from SAN. Which validation step is most appropriate?

Verify that the NetApp SVM is in a running state.

Check the UCS Manager logs for any errors.

Review the Nexus switch configuration for VLAN mismatches.

Reboot the server and verify that it boots from the SAN LUN.

What is the purpose of a port channel on a Cisco Nexus switch?

To provide security by filtering traffic based on MAC addresses

To segment traffic into separate broadcast domains

To increase bandwidth and provide redundancy by combining multiple physical links

To connect the switch to a storage system using Fibre Channel

After configuring a FlexPod, the administrator wants to validate that the UCS servers can access the NetApp storage via FCoE. Which validation step is appropriate?

Review the Nexus switch configuration for VLAN mismatches.

Ping the storage LIF from the UCS server.

Check that the vHBA on the UCS server shows a logged-in state in UCS Manager.

Verify that the NetApp SVM is in a running state.

Cisco and NetApp Certified FlexPod Implementation and Administration Specialist

Domain 3Objective 1

How to Install and Configure the FlexPod Components CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 4)

Part of the FlexPod Configuration domain, which makes up ~42% of our current practice bank.

28questions here

6free pages

6concepts

Questions 16–20

16foundation · easy
What is the purpose of a VLAN in a FlexPod network configuration?
Select an answer first
17application · medium
A NetApp administrator is configuring a new SVM for a FlexPod. The SVM will serve NFS to VMware ESXi hosts. Which configuration is required on the SVM to allow NFS access?
Select an answer first
18expert · hard
After configuring a FlexPod, the administrator wants to validate the end-to-end path from a UCS server to a NetApp LUN. The server is configured to boot from SAN. Which validation step is most appropriate?
Select an answer first
19foundation · easy
What is the purpose of a port channel on a Cisco Nexus switch?
Select an answer first
20application · medium
After configuring a FlexPod, the administrator wants to validate that the UCS servers can access the NetApp storage via FCoE. Which validation step is appropriate?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST” is a trademark of its owner, used for identification only.