After configuring the FlexPod components, the administrator wants to verify that the end-to-end path from a UCS server to a NetApp LUN is functional. Which action should be taken to validate this?

Verify that the NetApp SVM is up and running.

Review the Nexus switch configuration for VLAN mismatches.

Perform a LUN scan from the UCS server and verify that the disk appears in the OS.

Check the UCS fabric interconnect logs for any errors.

What is the purpose of validating a FlexPod solution after integration?

To configure the initial VLANs on the switches

To create the storage aggregates on the NetApp system

To ensure all components work together as expected

To install the operating system on the servers

During FlexPod installation, the cabling team connects the NetApp storage controllers to the Cisco Nexus switches. After powering on, the storage interfaces show link up but no traffic is passing. What is the most likely cause?

The Nexus switches are not running the correct NX-OS version.

The fiber cables are single-mode but the transceivers are multi-mode.

The storage controllers are not configured with an IP address.

The VLAN assigned to the storage interfaces is not present on the Nexus switchports.

Cisco and NetApp Certified FlexPod Implementation and Administration Specialist

Domain 3Objective 1

How to Install and Configure the FlexPod Components CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 3)

Part of the FlexPod Configuration domain, which makes up ~42% of our current practice bank.

28questions here

6free pages

6concepts

Questions 11–15

11foundation · easy
Which component is managed by Cisco UCS Manager to provide network connectivity for server chassis?
Select an answer first
12application · medium
After configuring the FlexPod components, the administrator wants to verify that the end-to-end path from a UCS server to a NetApp LUN is functional. Which action should be taken to validate this?
Select an answer first
13foundation · easy
What is the purpose of validating a FlexPod solution after integration?
Select an answer first
14application · medium
During FlexPod installation, the cabling team connects the NetApp storage controllers to the Cisco Nexus switches. After powering on, the storage interfaces show link up but no traffic is passing. What is the most likely cause?
Select an answer first
15foundation · easy
Which NetApp ONTAP object is created to provide storage capacity for LUNs and volumes?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST” is a trademark of its owner, used for identification only.

How to Install and Configure the FlexPod Components CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 3)

Questions 11–15

Which component is managed by Cisco UCS Manager to provide network connectivity for server chassis?

After configuring the FlexPod components, the administrator wants to verify that the end-to-end path from a UCS server to a NetApp LUN is functional. Which action should be taken to validate this?

What is the purpose of validating a FlexPod solution after integration?

During FlexPod installation, the cabling team connects the NetApp storage controllers to the Cisco Nexus switches. After powering on, the storage interfaces show link up but no traffic is passing. What is the most likely cause?

Which NetApp ONTAP object is created to provide storage capacity for LUNs and volumes?

Keep studying — FlexPod Configuration