A FlexPod environment uses NetApp AFF storage with NFS for VMware datastores. The administrator needs to create a new datastore for a critical application. The application requires a consistent snapshot for backup. What should the administrator configure to ensure snapshot consistency?

Create a snapshot copy of the volume manually

Enable deduplication on the volume

Enable the NetApp VSC (Virtual Storage Console) and use the snapshot consistency feature

A FlexPod environment uses iSCSI for storage. The administrator has configured the SVM and LUNs. To validate the storage configuration, what should the administrator do?

Check the aggregate's used space

Check that the ESXi hosts can see the LUNs and can create a VMFS datastore

Verify the iSCSI LIF is on the same VLAN as the management network

Ensure the SVM has NFS protocol enabled

A FlexPod environment uses FCoE between Cisco UCS and a NetApp storage system. The administrator is configuring a new SVM for FCoE. Which configuration is required on the SVM to support FCoE?

Create an iSCSI LIF on the same VLAN

Create an FCoE LIF on a VLAN that carries FCoE traffic

Create a LUN and map it to the initiator group

Cisco and NetApp Certified FlexPod Implementation and Administration Specialist

Domain 3Objective 5

How to Configure Storage in a FlexPod Solution CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 1)

Part of the FlexPod Configuration domain, which makes up ~42% of our current practice bank.

18questions here

4free pages

6concepts

Questions 1–5

1application · medium
A FlexPod environment uses NetApp AFF storage with NFS for VMware datastores. The administrator needs to create a new datastore for a critical application. The application requires a consistent snapshot for backup. What should the administrator configure to ensure snapshot consistency?
Select an answer first
2foundation · easy
Which ONTAP feature allows you to create multiple logical storage containers within a single physical aggregate, each with its own size and settings?
Select an answer first
3foundation · easy
In a FlexPod solution, which storage component is the fundamental unit of physical storage that aggregates disks into a single pool from which logical storage is created?
Select an answer first
4application · medium
A FlexPod environment uses iSCSI for storage. The administrator has configured the SVM and LUNs. To validate the storage configuration, what should the administrator do?
Select an answer first
5application · medium
A FlexPod environment uses FCoE between Cisco UCS and a NetApp storage system. The administrator is configuring a new SVM for FCoE. Which configuration is required on the SVM to support FCoE?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST” is a trademark of its owner, used for identification only.

How to Configure Storage in a FlexPod Solution CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 1)

Questions 1–5

A FlexPod environment uses NetApp AFF storage with NFS for VMware datastores. The administrator needs to create a new datastore for a critical application. The application requires a consistent snapshot for backup. What should the administrator configure to ensure snapshot consistency?

Which ONTAP feature allows you to create multiple logical storage containers within a single physical aggregate, each with its own size and settings?

In a FlexPod solution, which storage component is the fundamental unit of physical storage that aggregates disks into a single pool from which logical storage is created?

A FlexPod environment uses iSCSI for storage. The administrator has configured the SVM and LUNs. To validate the storage configuration, what should the administrator do?

A FlexPod environment uses FCoE between Cisco UCS and a NetApp storage system. The administrator is configuring a new SVM for FCoE. Which configuration is required on the SVM to support FCoE?

Keep studying — FlexPod Configuration