A network engineer is configuring a new Nexus switch for a FlexPod environment. The switch will be managed remotely, and the engineer needs to ensure that the management interface is reachable from the corporate network. The engineer also needs to set the hostname and enable SSH for secure access. Which configuration steps should the engineer perform?

Enable SSH and configure the management IP address, but do not configure a default gateway because SSH uses the management port.

Set the hostname, enable SSH, and configure the default gateway, but skip the management IP address.

Set the hostname, configure the management interface with an IP address and default gateway, and enable SSH.

Configure the management IP address and default gateway, but do not set the hostname because it is optional.

Which Spanning Tree Protocol (STP) mode is the default on Cisco Nexus switches?

MSTP (Multiple Spanning Tree Protocol)

Which command configures NTP on a Cisco Nexus switch to use an external time server at 192.168.1.100?

switch(config)# ntp peer 192.168.1.100

switch(config)# ntp source 192.168.1.100

switch(config)# ntp enable 192.168.1.100

switch(config)# ntp server 192.168.1.100

Which command saves the running configuration to the startup configuration on a Cisco Nexus switch?

switch# copy running-config startup-config

switch# copy startup-config running-config

In a vPC configuration, what is the purpose of the peer link?

It carries control traffic and data traffic between the two vPC peer switches.

It is used exclusively for management traffic between the switches.

It provides a backup path for the management network.

It is used to connect the vPC peers to the upstream network.

Cisco and NetApp Certified FlexPod Implementation and Administration Specialist

Domain 3Objective 6

How to Configure Cisco Nexus Switches CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 1)

Part of the FlexPod Configuration domain, which makes up ~42% of our current practice bank.

11questions here

3free pages

9concepts

Questions 1–5

1application · medium
A network engineer is configuring a new Nexus switch for a FlexPod environment. The switch will be managed remotely, and the engineer needs to ensure that the management interface is reachable from the corporate network. The engineer also needs to set the hostname and enable SSH for secure access. Which configuration steps should the engineer perform?
Select an answer first
2foundation · easy
Which Spanning Tree Protocol (STP) mode is the default on Cisco Nexus switches?
Select an answer first
3foundation · easy
Which command configures NTP on a Cisco Nexus switch to use an external time server at 192.168.1.100?
Select an answer first
4foundation · easy
Which command saves the running configuration to the startup configuration on a Cisco Nexus switch?
Select an answer first
5foundation · easy
In a vPC configuration, what is the purpose of the peer link?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST” is a trademark of its owner, used for identification only.