An admin is deploying an MX7000 chassis in a data center with strict security policies. The management network is isolated and does not have DHCP. The admin needs to perform the initial configuration of the IOMs. The admin has physical access to the chassis but the laptop does not have a serial port. What should the admin do to access the IOM console?

Use a USB-to-serial adapter to connect to the IOM's console port.

Connect the laptop to the management network and use SSH to access the IOM.

Use a fiber cable to connect the laptop to the IOM's uplink port.

Use the IOM's out-of-band management port with a static IP.

An admin is setting up a new IOM and needs to perform the initial configuration. The admin has a laptop with only a USB-C port and no serial port. The admin has a USB-C to serial adapter. What should the admin do to connect to the IOM's console port?

Connect the USB-C to serial adapter to the laptop and use a serial cable to connect to the IOM's console port.

Use a fiber cable to connect the laptop to the IOM's uplink port.

Use a USB-C to Ethernet adapter to connect to the IOM's management port.

Connect an Ethernet cable from the laptop to the IOM's management port.

What is the first step to access the Dell PowerEdge MX7000 fabric switch management interface for initial configuration?

Connect a management station to the switch's console port using a serial cable

Power on the switch and wait for it to obtain an IP address from DHCP automatically

Connect a monitor and keyboard to the switch's VGA port

Connect an Ethernet cable from the switch's management port to a DHCP-enabled network

Dell PowerEdge MX Modular Deploy

Domain 4Objective 4

Describe the Initial Switch Set-Up Requirements POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 4)

Part of the MX7000 Implementation domain, which accounts for 19% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

24questions here

5free pages

4concepts

19%of the exam

Questions 16–20

16expert · medium
An admin is deploying an MX7000 chassis in a data center with strict security policies. The management network is isolated and does not have DHCP. The admin needs to perform the initial configuration of the IOMs. The admin has physical access to the chassis but the laptop does not have a serial port. What should the admin do to access the IOM console?
Select an answer first
17expert · medium
An admin is setting up a new IOM and needs to perform the initial configuration. The admin has a laptop with only a USB-C port and no serial port. The admin has a USB-C to serial adapter. What should the admin do to connect to the IOM's console port?
Select an answer first
18application · medium
An admin is configuring an IOM and needs to set the management VLAN to 200. The admin is currently connected via the console port. Which command should the admin use to set the management VLAN?
Select an answer first
19foundation · easy
What is the first step to access the Dell PowerEdge MX7000 fabric switch management interface for initial configuration?
Select an answer first
20application · medium
An admin has configured an IOM with a management IP address and wants to verify that the IOM is reachable from the management network. Which command should the admin use from a workstation on the management network?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.

Describe the Initial Switch Set-Up Requirements POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 4)

Questions 16–20

An admin is setting up a new IOM and needs to perform the initial configuration. The admin has a laptop with only a USB-C port and no serial port. The admin has a USB-C to serial adapter. What should the admin do to connect to the IOM's console port?

An admin is configuring an IOM and needs to set the management VLAN to 200. The admin is currently connected via the console port. Which command should the admin use to set the management VLAN?

What is the first step to access the Dell PowerEdge MX7000 fabric switch management interface for initial configuration?

An admin has configured an IOM with a management IP address and wants to verify that the IOM is reachable from the management network. Which command should the admin use from a workstation on the management network?

Keep studying — MX7000 Implementation