A remote admin needs to configure an IOM in an MX7000 chassis. The admin has no physical access to the chassis, and the IOM has no IP configuration. The admin has access to the OME-Modular interface. What should the admin do to access the IOM's console?

Use SSH to connect to the IOM's default IP address.

Use Telnet to connect to the IOM's management port.

Use a VPN to connect to the management network and then use SSH.

Use the OME-Modular console feature to open a console session to the IOM.

Which of the following is a valid method to access the Dell PowerEdge MX7000 fabric switch management interface after an IP address has been configured?

SNMP GET requests to the switch's management IP address

SSH to the switch's management IP address

FTP to the switch's management IP address

Before performing the initial setup of a Dell PowerEdge MX7000 fabric switch, which of the following must be available?

A fiber optic cable connected to the switch's uplink port

An existing VLAN with a configured management interface

A management station with a serial console application and a console cable

A DHCP server with a pre-configured reservation for the switch's MAC address

Which of the following indicates that the initial configuration of a Dell PowerEdge MX7000 fabric switch is correctly applied and the switch is operational?

The switch's power LED is green

The switch's console port is active

The switch responds to ping on the configured management IP address

Dell PowerEdge MX Modular Deploy

Domain 4Objective 4

Describe the Initial Switch Set-Up Requirements POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 3)

Part of the MX7000 Implementation domain, which accounts for 19% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

24questions here

5free pages

4concepts

19%of the exam

Questions 11–15

11expert · medium
A remote admin needs to configure an IOM in an MX7000 chassis. The admin has no physical access to the chassis, and the IOM has no IP configuration. The admin has access to the OME-Modular interface. What should the admin do to access the IOM's console?
Select an answer first
12foundation · easy
Which of the following is a valid method to access the Dell PowerEdge MX7000 fabric switch management interface after an IP address has been configured?
Select an answer first
13foundation · easy
Before performing the initial setup of a Dell PowerEdge MX7000 fabric switch, which of the following must be available?
Select an answer first
14foundation · easy
Which of the following indicates that the initial configuration of a Dell PowerEdge MX7000 fabric switch is correctly applied and the switch is operational?
Select an answer first
15foundation · easy
After configuring the initial settings on a Dell PowerEdge MX7000 fabric switch, which command is used to verify the management IP address and VLAN configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.