Understand the Relationship Between the Fabrics in Chassis Management Groups and Chassis Backup Lead POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   An administrator is configuring a CMG with two MX7000 chassis. The administrator wants to ensure that the fabric configuration is consistent across both chassis and that changes are applied automatically. What is the correct configuration?

   • AConfigure both chassis with identical fabric settings manually.
   • BConnect the two chassis with a dedicated cable for fabric sharing.
   • CUse a single chassis to manage the fabric for both chassis without a CMG.
   • DDesignate one chassis as the primary lead and the other as the backup lead in the CMG.
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   What is the purpose of fabric redundancy in a Chassis Management Group?

   • ATo enable faster data transfer speeds between chassis.
   • BTo provide a backup fabric path in case the primary fabric fails.
   • CTo allow multiple chassis to share the same fabric without configuration.
   • DTo increase the number of physical ports available for compute sleds.
   Reveal Solution Discussion Select an answer first
4. 3expert · hard

   A CMG has two chassis, Chassis A (primary lead) and Chassis B (backup lead). The administrator notices that the fabric configuration on Chassis B is not synchronized with Chassis A. What is the most likely cause of this issue?

   • AChassis B is not connected to the same management network as Chassis A.
   • BChassis B has a different number of IOMs than Chassis A.
   • CChassis B has a different firmware version than Chassis A.
   • DChassis B was offline when the last configuration change was made on Chassis A.
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   An organization has a CMG with two chassis. The administrator notices that the fabric configuration on the backup lead is out of sync with the primary lead. What is the most likely cause of this issue?

   • AThe backup lead has a different number of IOMs than the primary lead.
   • BThe backup lead has a different firmware version than the primary lead.
   • CThe backup lead was temporarily offline when the last configuration change was made on the primary lead.
   • DThe backup lead is not connected to the same management network as the primary lead.
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   An administrator is adding a new MX7000 chassis to an existing CMG. The new chassis has IOMs that are already configured with a fabric that is not part of the CMG's fabric set. What will happen to the new chassis's IOMs?

   • AThe new chassis will be rejected from the CMG until the fabric configuration is manually aligned.
   • BThe CMG will apply its fabric configuration to the new chassis, overriding the existing settings.
   • CThe new chassis will operate with a hybrid configuration, combining its own and the CMG's fabrics.
   • DThe new chassis will retain its own fabric configuration, and the CMG will include it as an additional fabric.
   Reveal Solution Discussion Select an answer first