Understand the Relationship Between the Fabrics in Chassis Management Groups and Chassis Backup Lead POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 4)

Questions 16–20

1. 16application · medium

   An administrator is adding a third MX7000 chassis to an existing CMG. The new chassis has IOMs that are already configured with a fabric VLAN that conflicts with the CMG's fabric settings. What is the expected behavior when the chassis is added to the CMG?

   • AThe CMG fabric configuration will be applied to the new chassis, and the conflicting VLAN will be overwritten.
   • BThe chassis will be rejected from the CMG until the VLAN conflict is resolved manually.
   • CThe CMG will create a new VLAN to accommodate both configurations.
   • DThe new chassis will keep its own VLAN configuration, and the CMG will adapt to it.
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   What is the primary purpose of sharing fabrics across chassis in a Chassis Management Group?

   • ATo enable a single, consistent network fabric that spans all chassis in the group.
   • BTo reduce the number of physical switches required in the data center.
   • CTo allow each chassis to have unique, isolated network configurations.
   • DTo allow each chassis to have its own separate management network.
   Reveal Solution Discussion Select an answer first
4. 18expert · hard

   A CMG has two chassis, Chassis A (primary lead) and Chassis B (backup lead). The administrator needs to perform a maintenance task on Chassis B that requires it to be powered off. What is the impact on the CMG's fabric management?

   • AThe CMG will automatically promote another chassis to backup lead.
   • BThe CMG will fail over to Chassis B as the primary lead.
   • CThe CMG will lose fabric management until Chassis B is powered back on.
   • DThe CMG will continue to operate with Chassis A as the primary lead, but there will be no backup lead until Chassis B is powered back on.
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   An organization has a CMG with two MX7000 chassis. The primary chassis lead experiences a hardware failure and goes offline. The backup lead automatically takes over. Which of the following describes the immediate impact on the fabric configuration and the IOMs in both chassis?

   • AThe fabric configuration is lost and must be re-applied manually by the administrator to both chassis.
   • BThe fabric configuration is temporarily frozen until the primary lead is restored.
   • CThe fabric configuration remains active and unchanged, and the IOMs continue to operate with the same settings.
   • DThe IOMs in the chassis with the failed lead will reboot and require re-provisioning.
   Reveal Solution Discussion Select an answer first
6. 20foundation · easy

   In a Dell PowerEdge MX7000 Chassis Management Group (CMG), how are fabrics managed across the member chassis?

   • AFabrics are managed through an external switch that connects all chassis in the CMG.
   • BFabrics are only managed on the chassis backup lead and then manually copied to each chassis.
   • CEach chassis independently manages its own fabric configuration, with no synchronization between chassis.
   • DFabrics are defined once on the chassis management lead and automatically shared with all chassis in the CMG.
   Reveal Solution Discussion Select an answer first