Describe the Infrastructure and Out-Of-The-Box Setup on an MX7000 POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   A data center engineer is racking a new MX7000 chassis. The chassis has two management modules installed in slots MM1 and MM2, and four I/O modules in slots A1, A2, B1, and B2. The engineer needs to connect the management network so that the chassis can be reached for initial configuration. Which connection method should the engineer use?

   • AConnect the serial console port on the chassis midplane to the management network
   • BConnect the I/O module uplink ports in A1 and B1 to the management network
   • CConnect the front-panel USB port to the management network with a USB-to-Ethernet adapter
   • DConnect the dedicated management ports on both MM1 and MM2 to the management network
   Reveal Solution Discussion Select an answer first
2. 2expert · hard

   An administrator is setting up a new MX7000 chassis in a remote branch office. The chassis has been powered on, and the management modules are booted. The administrator is accessing the OpenManage Enterprise Modular interface for the first time. The administrator notices that the management IP address is set to a default value that is not routable from the administrator's workstation. The administrator needs to change the management IP address. What is the most efficient way to do this?

   • AUse the iDRAC of a compute sled to change the chassis management IP
   • BReboot the chassis and hope the DHCP server assigns a routable IP address
   • CConnect a serial console cable to the management module and use the CLI to change the IP address
   • DUse the front LCD panel to navigate to the network settings and change the IP address
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   In the Dell PowerEdge MX7000 chassis, which component is responsible for providing out-of-band management, video redirection, and virtual media functionality for the entire chassis?

   • AI/O module
   • BMidplane
   • CCompute sled
   • DManagement module
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   An administrator is configuring a new MX7000 chassis via the OpenManage Enterprise Modular web interface. The administrator has completed the initial network settings and is now at the step to set the admin credentials. The organization's security policy requires that the admin account use a strong password and that the account be locked after five failed attempts. Where should the administrator configure the account lockout policy?

   • AIn the local user management settings within OpenManage Enterprise Modular
   • BIn the I/O module's management interface
   • CIn the chassis LCD panel menu
   • DIn the iDRAC settings of each compute sled
   Reveal Solution Discussion Select an answer first
6. 5expert · hard

   An administrator is performing the initial setup of an MX7000 chassis. The administrator has connected the management network and powered on the chassis. The LCD panel shows the management IP as 192.168.1.100. The administrator opens a web browser and navigates to https://192.168.1.100, but the page does not load. What is the most likely cause?

   • AThe management module is still booting
   • BThe I/O modules are not configured
   • CThe compute sleds are not powered on
   • DThe web browser is using HTTP instead of HTTPS
   Reveal Solution Discussion Select an answer first