Employ the Chassis Deployment Wizard to Configure the Initial Chassis. POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   What is the primary purpose of the user accounts step in the Chassis Deployment Wizard?

   • ATo configure DNS servers
   • BTo configure the chassis network settings
   • CTo set the chassis name and location
   • DTo create an initial administrator account for chassis management
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   An administrator is configuring the management network for a new MX7000 chassis. The chassis must be reachable at a static IP address on the corporate management VLAN, and the administrator wants to ensure that the chassis can resolve the hostnames of other management devices. Which two settings must be configured in the wizard?

   • AIP address and subnet mask only
   • BChassis name and location, and NTP server
   • CDNS server addresses and domain name only
   • DIP address, subnet mask, and gateway; and DNS server addresses
   Reveal Solution Discussion Select an answer first
4. 3expert · medium

   An administrator is running the Chassis Deployment Wizard for a new MX7000. The administrator has already configured the network settings and time settings. The administrator now wants to ensure that the chassis can be managed from a remote site and that logs are timestamped correctly. The administrator is unsure whether the gateway and NTP server are configured correctly. What should the administrator do?

   • AReboot the chassis to apply the settings automatically.
   • BGo back to the Network Settings step to verify the gateway, and go back to the Time and NTP Settings step to verify the NTP server.
   • CApply the configuration and then test connectivity and time synchronization.
   • DSkip the review and apply the configuration immediately.
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   A technician is deploying a new MX7000 chassis. The chassis has just been powered on and the technician needs to access the Chassis Deployment Wizard for the first time. The technician has a laptop connected to the management network and knows the default management IP address. What should the technician do to launch the wizard?

   • AConnect a serial cable to the chassis management module and use a terminal emulator to run the wizard from the CLI.
   • BOpen a web browser and navigate to the default management IP address, then log in with the default credentials to start the wizard.
   • CPress the chassis LCD panel button to cycle through menus and select 'Deployment Wizard'.
   • DUse the OpenManage Enterprise console to discover the chassis and launch the wizard from the appliance.
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   Which of the following is specified in the DNS settings step of the Chassis Deployment Wizard?

   • ADefault gateway
   • BDomain name
   • CChassis location
   • DNTP server address
   Reveal Solution Discussion Select an answer first