Describe the Infrastructure and Out-Of-The-Box Setup on an MX7000 POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   Which component of the Dell PowerEdge MX7000 chassis provides the high-speed data pathways that connect compute sleds, storage sleds, and I/O modules without a traditional backplane?

   • ACooling fan module
   • BMidplane
   • CManagement module
   • DPower supply unit
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   An organization is deploying two MX7000 chassis in the same data center. The administrator wants to manage both chassis from a single OpenManage Enterprise Modular instance. During the initial setup of the second chassis, what must the administrator do to enable centralized management?

   • ACreate a chassis group and add both chassis to it
   • BConfigure both chassis with the same admin password
   • CAssign the same fabric name to both chassis
   • DConnect the two chassis via a direct Ethernet cable between their management ports
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   How does OpenManage Enterprise Modular detect I/O modules during the initial setup of the MX7000?

   • AManually, by entering the module's serial number
   • BBy importing a configuration file
   • CAutomatically, by querying the module's inventory
   • DBy scanning a QR code on the module
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   During the initial setup of an MX7000, the administrator notices that the I/O modules in slots A1 and A2 are detected as 'Fabric A' and the modules in B1 and B2 as 'Fabric B'. The administrator wants to ensure that compute sleds can communicate with each other across both fabrics. What must be true for this to work?

   • AThe compute sleds must have mezzanine cards installed for both Fabric A and Fabric B
   • BThe I/O modules must be set to the same fabric mode (Ethernet or FC)
   • CThe management modules must be configured in active-standby mode
   • DThe I/O modules in Fabric A and Fabric B must be configured with the same VLANs
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A technician has just powered on a new MX7000 chassis for the first time. The technician wants to access the management interface to begin the out-of-the-box setup. The chassis is connected to the corporate network, but the technician does not know the management IP address. What is the first step the technician should take to discover the management interface?

   • AConnect a monitor and keyboard to the rear VGA port on the management module
   • BPress the chassis identification button to cycle through IP addresses on the LCD
   • CRun a network scan across the entire corporate subnet to find the chassis
   • DUse the LCD front panel to view the default management IP address
   Reveal Solution Discussion Select an answer first