How to Configure Networks in a UCS Solution CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 5)

Questions 21–24

1. 21foundation · easy

   In UCS Manager, which tool or command can be used to verify the status of uplink ports and port channels?

   • AThe VM-FEX tab
   • BThe Admin tab
   • CThe Storage tab
   • DThe Equipment tab in UCS Manager
   Reveal Solution Discussion Select an answer first
2. 22expert · hard

   A FlexPod environment is being deployed for a telecommunications company that requires high availability for its network. The UCS fabric interconnects have four 10GbE uplinks each to the upstream switches. The network team wants to ensure that a single uplink failure does not cause any downtime and that all uplinks are utilized for traffic. You are configuring the uplink ports in UCS Manager. What should you do?

   • AEnable fabric failover on the vNIC templates and assign each uplink to a different VLAN.
   • BCreate a port channel with all four uplinks and configure the upstream switch ports as a corresponding port channel.
   • CConfigure the uplinks as Fibre Channel ports and use the upstream switch for Ethernet connectivity.
   • DConfigure each uplink as a separate Ethernet port and rely on the upstream switch for redundancy.
   Reveal Solution Discussion Select an answer first
4. 23foundation · easy

   In UCS Manager, which type of port is configured on a fabric interconnect to connect to a Fibre Channel switch or storage array?

   • AFibre Channel uplink port
   • BServer port
   • CManagement port
   • DEthernet uplink port
   Reveal Solution Discussion Select an answer first
5. 24expert · hard

   A FlexPod environment is being deployed for a multi-tenant service provider. Each tenant requires network isolation and has different performance requirements. The provider wants to use a single UCS domain to serve all tenants. You are designing the network configuration. What is the most effective approach?

   • AUse a single VLAN group for all tenants and rely on the upstream switch for isolation.
   • BCreate a separate UCS domain for each tenant.
   • CUse a single vNIC template with all tenant VLANs and use QoS to differentiate performance.
   • DCreate a separate VLAN group for each tenant and assign the appropriate vNIC template to each tenant's service profiles.
   Reveal Solution Discussion Select an answer first