How to Configure Networks in a UCS Solution CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 4)

Questions 16–20

1. 16expert · hard

   A FlexPod environment is being deployed for a cloud service provider that offers both virtualized and bare-metal workloads. The virtualized workloads require vNICs with multiple VLANs, while the bare-metal workloads require a single VLAN. You are creating service profiles for the servers. What is the most efficient approach?

   • ACreate a single vNIC template with all VLANs and use it for all service profiles.
   • BCreate two vNIC templates: one with multiple VLANs for virtualized workloads and one with a single VLAN for bare-metal workloads, then assign the appropriate template to each service profile.
   • CUse the default vNIC template and rely on the hypervisor to assign VLANs.
   • DCreate a vNIC template with no VLANs and add VLANs directly to each service profile.
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A FlexPod environment is being deployed for a government agency that requires strict network segmentation. The security team mandates that management traffic must be completely isolated from data traffic. You are configuring the UCS fabric interconnects. What should you do to ensure this isolation?

   • AUse separate VLANs for management and data traffic and assign them to different vNIC templates.
   • BCreate a single vNIC with both management and data VLANs and use QoS policies to prioritize management traffic.
   • CDisable the management VLAN on the fabric interconnects and use only data VLANs.
   • DUse the same VLAN for both management and data traffic but rely on the upstream switch to filter.
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   A FlexPod environment is experiencing intermittent connectivity issues. Servers in one rack can ping each other but cannot reach the default gateway. The UCS fabric interconnects are configured with a port channel to the upstream switches. You have verified that the port channel is up and the VLANs are correctly assigned. What is the most likely cause of the issue?

   • AThe upstream switch port channel is configured with a different hashing algorithm.
   • BThe fabric interconnect uplink ports are configured as Fibre Channel ports.
   • CThe VLAN used for the gateway is not included in the vNIC template assigned to the servers.
   • DThe upstream switch has Spanning Tree Protocol (STP) blocking the port channel.
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A FlexPod deployment for a financial services firm requires high availability for the server network. The UCS fabric interconnects are connected to the upstream switches using four 10GbE uplinks per fabric. The network team wants to ensure that a single uplink failure does not cause any downtime and that all uplinks are utilized for traffic. You are configuring the uplink ports in UCS Manager. What should you configure?

   • ACreate a port channel with all four uplinks and configure the upstream switch ports as a corresponding port channel.
   • BConfigure each uplink as a separate Ethernet port and rely on the upstream switch for redundancy.
   • CConfigure the uplinks as Fibre Channel ports and use the upstream switch for Ethernet connectivity.
   • DEnable fabric failover on the vNIC templates and assign each uplink to a different VLAN.
   Reveal Solution Discussion Select an answer first
6. 20foundation · easy

   In UCS Manager, which LAN policy object is used to group multiple VLANs so they can be assigned together to a vNIC or service profile?

   • AUplink port
   • BLAN connectivity policy
   • CvNIC template
   • DVLAN group
   Reveal Solution Discussion Select an answer first