How to Configure Networks in a UCS Solution CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 3)

Questions 11–15

1. 11application · medium

   A FlexPod environment is being set up for a healthcare provider that uses Fibre Channel storage. The SAN administrator has defined a VSAN for production and a VSAN for backup. The servers need to access both VSANs, but the backup traffic should not impact production performance. You are configuring the SAN in UCS Manager. What should you do?

   • ACreate a single vHBA template with both VSANs and use QoS to prioritize production traffic.
   • BCreate two vHBA templates, one for each VSAN, and assign both to the service profile.
   • CCreate a single vHBA template with the production VSAN and use a separate physical HBA for backup.
   • DCreate a single vHBA template with the backup VSAN and use the service profile to switch to production when needed.
   Reveal Solution Discussion Select an answer first
2. 12application · medium

   A FlexPod environment is being deployed for a hospital that must isolate patient-monitoring traffic from general hospital IT traffic. The UCS fabric interconnects have two uplinks each to the top-of-rack switches. The storage team requires the management VLAN to be present on all servers, but the patient-monitoring VLAN must only be available to a subset of servers. You are creating the LAN policies and vNIC templates. Which approach satisfies the isolation requirement while minimizing administrative overhead?

   • ACreate a single VLAN group containing both VLANs and assign it to all vNIC templates, then rely on the upstream switch to filter traffic.
   • BCreate a single vNIC template with both VLANs as trunk ports and use service profile association to control which servers receive the template.
   • CCreate one VLAN group with the patient-monitoring VLAN and assign it to all vNIC templates, then use a separate vNIC for management traffic.
   • DCreate two VLAN groups: one with the management VLAN for all templates, and one with the patient-monitoring VLAN for a dedicated template used only by the required servers.
   Reveal Solution Discussion Select an answer first
4. 13foundation · easy

   In a UCS SAN configuration, what is the purpose of a VSAN?

   • ATo segment Fibre Channel traffic into separate logical SANs
   • BTo group vHBAs for management
   • CTo provide Ethernet connectivity to storage devices
   • DTo define the boot order for servers
   Reveal Solution Discussion Select an answer first
5. 14foundation · easy

   What is the primary purpose of using vNIC templates in UCS?

   • ATo define the physical ports used for uplinks
   • BTo standardize network interface configurations across multiple service profiles
   • CTo configure the boot order for servers
   • DTo manage the power state of servers
   Reveal Solution Discussion Select an answer first
6. 15application · medium

   A FlexPod environment is experiencing issues with SAN connectivity. Servers can boot from SAN, but they cannot access the production storage after boot. The vHBA templates are correctly configured with the production VSAN, and the service profiles are associated. You have verified that the Fibre Channel uplinks are up. What is the most likely cause of the issue?

   • AThe vHBA template is not assigned to the service profile.
   • BThe Fibre Channel uplinks are configured as Ethernet ports.
   • CThe VSAN is not correctly configured on the upstream Fibre Channel switch.
   • DThe service profile is not associated with the server.
   Reveal Solution Discussion Select an answer first