Examers.io
ExamsOrganizationsHow it worksPricingHelp & FAQ
Juniper Networks logo

Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)

Domain 7Objective 9

Configure, Monitor, or Troubleshoot MPLS Forwarding and LSPs JN0-364 Practice Questions (Page 3)

Part of the Multiprotocol Label Switching (MPLS) domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–1 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)

26questions here
6free pages
8concepts

Questions 11–15

  1. 11expert · hard

    You are troubleshooting an RSVP-TE LSP that is not coming up. You run 'show rsvp session' and see that the session is in the 'Down' state. You also run 'show rsvp neighbor' and see that the neighbor is 'Up'. What is the most likely cause of the LSP being down?

    Select an answer first
  2. 12foundation · easy

    Which command would you use to verify the signaling state of an RSVP-TE LSP?

    Select an answer first
  3. 13application · medium

    You are troubleshooting an MPLS network. A packet enters an ingress LSR and is forwarded along an LSP. You examine the MPLS forwarding table on the ingress LSR and see that the incoming label is 0 (implicit null) and the outgoing label is 100. What label operation will the ingress LSR perform on this packet?

    Select an answer first
  4. 14foundation · easy

    In the Junos MPLS forwarding table, what does the 'Label' column typically display?

    Select an answer first
  5. 15foundation · easy

    At which type of LSR does the label pop operation typically occur?

    Select an answer first
Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.