Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)
Domain 7Objective 8
Segment Routing with MPLS JN0-364 Practice Questions (Page 1)
Part of the Multiprotocol Label Switching (MPLS) domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–1 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)
27questions here
6free pages
8concepts
Questions 1–5
- 1
A service provider is designing an SR-MPLS network with multiple areas. The engineer wants to ensure that prefix SIDs are globally unique across the entire network. Which design consideration is most important?
Select an answer first - 2
In segment routing with MPLS, what does the term 'segment' refer to?
Select an answer first - 3
In SR-MPLS, what operation is performed when a router receives a packet with a label that is the top of the stack and the packet's destination is the local router?
Select an answer first - 4
A Juniper router is configured with an SRGB of 16000-23999. The engineer wants to assign a prefix SID of 100 to a loopback prefix. What MPLS label will be used for this prefix in the forwarding table?
Select an answer first - 5
An SR-MPLS packet arrives at a router with a label stack of {16001, 16002}. The top label 16001 corresponds to a prefix SID for the router's own loopback. What operation will the router perform on the top label?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.