Where is the SRGB configured in Junos?

Under the MPLS protocol hierarchy

Under the OSPF protocol hierarchy

Under the routing-options hierarchy

In segment routing, what is the difference between a prefix segment and a nodal segment?

A prefix segment identifies a prefix, while a nodal segment identifies a node

A nodal segment is always an adjacency segment

A prefix segment is used only in OSPF, while a nodal segment is used only in IS-IS

A prefix segment is a type of adjacency segment

What is the primary benefit of TI-LFA in segment routing?

It provides fast reroute that is independent of the network topology

It eliminates the need for MPLS

It reduces the number of labels in the label stack

It provides a backup path that is always the shortest path

A network operator is running a multi-area OSPF network. The engineer wants to enable segment routing across all areas. What is a key consideration for SR in a multi-area OSPF environment?

Prefix SIDs must be unique across all areas

SR is only supported in the backbone area

Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)

Domain 7Objective 8

Segment Routing with MPLS JN0-364 Practice Questions (Page 2)

Part of the Multiprotocol Label Switching (MPLS) domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–1 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

8concepts

Questions 6–10

6foundation · easy
Where is the SRGB configured in Junos?
Select an answer first
7foundation · easy
In segment routing, what is the difference between a prefix segment and a nodal segment?
Select an answer first
8foundation · easy
Which IGP protocols are extended to distribute segment routing information?
Select an answer first
9foundation · easy
What is the primary benefit of TI-LFA in segment routing?
Select an answer first
10expert · hard
A network operator is running a multi-area OSPF network. The engineer wants to enable segment routing across all areas. What is a key consideration for SR in a multi-area OSPF environment?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-364

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.