Configure and Verify Static Routing SONIC-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   What is the default administrative distance for a static route in Dell SONiC?

   • A110
   • B120
   • C1
   • D0
   Reveal Solution Discussion Select an answer first
2. 2application · easy

   A Dell SONiC switch is used as a core router. It has a default route pointing to an upstream router at 10.0.0.1. The network team wants to verify that the default route is active and being used for traffic that does not match any specific route. Which command should be used?

   • Ashow running-config | include ip route
   • Bshow ip route 0.0.0.0/0
   • Cshow ip route summary
   • Dshow ip route static
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   What is the correct command to remove a static route to 192.168.10.0/24 with next-hop 10.0.0.1 from the Dell SONiC configuration?

   • Asonic(config)# no ip route 192.168.10.0/24 10.0.0.1
   • Bsonic(config)# clear ip route 192.168.10.0/24 10.0.0.1
   • Csonic(config)# remove ip route 192.168.10.0/24 10.0.0.1
   • Dsonic(config)# delete ip route 192.168.10.0/24 10.0.0.1
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What is the purpose of a default static route in a Dell SONiC router?

   • ATo provide a fallback path for traffic that does not match any other route in the routing table
   • BTo direct traffic to a specific destination network when a more specific route exists
   • CTo automatically learn routes from neighboring routers
   • DTo prioritize traffic based on QoS markings
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   Which show command displays the IPv4 routing table on a Dell SONiC switch, including static routes?

   • Ashow ip interface brief
   • Bshow protocols
   • Cshow running-config
   • Dshow ip route
   Reveal Solution Discussion Select an answer first