Outline the Operation of Route Redistribution SONIC-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   In Dell SONiC, what is the purpose of applying a route map during route redistribution?

   • ATo automatically create static routes for all redistributed routes
   • BTo increase the speed of route propagation
   • CTo change the administrative distance of redistributed routes
   • DTo filter which routes are redistributed and modify their attributes
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   In Dell SONiC, which configuration mode must you be in to issue the 'redistribute bgp' command for OSPF?

   • AGlobal configuration mode
   • BBGP router configuration mode
   • COSPF router configuration mode
   • DInterface configuration mode
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   A company is merging two networks: one running OSPF and the other running RIP. The administrator wants to ensure that routes from the RIP network are visible in the OSPF network. However, the administrator wants to control which RIP routes are advertised and modify their metric to be less preferred. What is the most appropriate approach?

   • AConfigure redistribution of OSPF into RIP and use a route map to set the metric.
   • BConfigure a default route in OSPF pointing to the RIP network.
   • CConfigure redistribution of RIP into OSPF and use a route map to set the metric and filter specific routes.
   • DUse static routes on the OSPF router to manually advertise the RIP subnets.
   Reveal Solution Discussion Select an answer first
5. 4expert · hard

   An administrator is redistributing OSPF routes into BGP on a Dell SONiC switch. The administrator wants to set the BGP local preference for all redistributed routes to 200. However, the administrator also wants to set the MED to 50 only for routes from a specific OSPF area. What is the most efficient way to achieve this?

   • AUse the 'neighbor route-map' command on the BGP neighbor to set local preference and MED.
   • BCreate a single route map that sets both local preference and MED for all routes.
   • CCreate two route maps: one to set local preference for all routes and another to set MED for routes from the specific area. Apply both to the 'redistribute ospf' command.
   • DUse the 'default-metric' command to set the MED and a route map to set local preference.
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   Which Dell SONiC command is used to define a route map that will be applied during redistribution?

   • Aredistribute-map NAME
   • Bprefix-list NAME permit 10
   • Croute-map NAME permit 10
   • Daccess-list NAME permit 10
   Reveal Solution Discussion Select an answer first