To view the BGP routes that have been learned and are in the BGP table (not necessarily installed in the routing table), which command should you use?

show bgp neighbors advertised-routes

A Dell SONiC switch receives two BGP routes for the same prefix 192.0.2.0/24 from two different eBGP neighbors. Route A has AS path 65002 65003, and Route B has AS path 65002 65003 65004. Both routes have the same local preference, weight, and MED. Which route will be preferred by BGP best-path selection?

Route B, because it has a longer AS path, indicating more specific routing information.

The route with the higher MED is preferred, so Route B is chosen.

Both routes are equally preferred, and BGP load-balances between them.

Route A, because it has a shorter AS path.

In BGP terminology, what does NLRI (Network Layer Reachability Information) represent?

The local router's BGP router ID and autonomous system number.

The sequence of autonomous systems that a route has traversed.

The list of BGP neighbors that a router is configured to peer with.

The set of IP prefixes and their associated path attributes that BGP advertises to peers.

Dell SONiC Deploy

Domain 4Objective 6

Configure and Verify BGP SONIC-DEPLOY Practice Questions (Page 4)

Part of the Routing domain, which accounts for 24% of the SONIC-DEPLOY exam.

20questions here

4free pages

7concepts

24%of the exam

Questions 16–20

16foundation · easy
To view the BGP routes that have been learned and are in the BGP table (not necessarily installed in the routing table), which command should you use?
Select an answer first
17application · medium
A Dell SONiC switch receives two BGP routes for the same prefix 192.0.2.0/24 from two different eBGP neighbors. Route A has AS path 65002 65003, and Route B has AS path 65002 65003 65004. Both routes have the same local preference, weight, and MED. Which route will be preferred by BGP best-path selection?
Select an answer first
18application · medium
An engineer wants to advertise a static route 172.16.0.0/16 into BGP on a Dell SONiC switch. The static route is configured and appears in the routing table. Which command should be used to advertise this route?
Select an answer first
19foundation · easy
Which BGP neighbor state indicates that the TCP connection has been established and the OPEN message has been sent, but the router is waiting for the OPEN message from the peer?
Select an answer first
20foundation · easy
In BGP terminology, what does NLRI (Network Layer Reachability Information) represent?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to SONIC-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “SONIC-DEPLOY” is a trademark of its owner, used for identification only.

Configure and Verify BGP SONIC-DEPLOY Practice Questions (Page 4)

Questions 16–20

To view the BGP routes that have been learned and are in the BGP table (not necessarily installed in the routing table), which command should you use?

An engineer wants to advertise a static route 172.16.0.0/16 into BGP on a Dell SONiC switch. The static route is configured and appears in the routing table. Which command should be used to advertise this route?

Which BGP neighbor state indicates that the TCP connection has been established and the OPEN message has been sent, but the router is waiting for the OPEN message from the peer?

In BGP terminology, what does NLRI (Network Layer Reachability Information) represent?

Keep studying — Routing