What is the purpose of preemption in VRRP?

To reduce the advertisement interval during high traffic

To allow a router with a higher priority to become master even if another router is already master

To prevent a router from becoming master if it has a lower IP address

To allow a backup router to take over if the master fails

A network administrator configures VRRP on two Dell PowerSwitch switches. The administrator wants to ensure that if the backup switch is the first to boot, it does not become the master and start forwarding traffic before the preferred master switch is ready. What should the administrator configure?

A lower advertisement interval on the preferred master switch

A longer master-down timer on the backup switch

A higher priority on the preferred master switch

Preemption enabled on the preferred master switch

What happens when a VRRP master router becomes unavailable?

A backup router takes over as master after the master down timer expires

All traffic is dropped until the master recovers

The virtual IP address is removed from the network

End hosts must be reconfigured with a new default gateway

What is a common reason to configure multiple VRRP groups on a single interface?

To provide redundancy for multiple subnets

To allow different routers to be master for different groups, enabling load sharing

To reduce the advertisement interval

To increase the security of the VRRP advertisements

Dell PowerSwitch Campus Deploy

Domain 2Objective 2

Describe the Operation and Behavior of the Virtual Router Redundancy Protocol POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 4)

Part of the First Hop Redundancy Protocol-FHRP domain, which accounts for 11% of the POWERSWITCH-CAMPUS-DEPLOY exam.

23questions here

5free pages

8concepts

11%of the exam

Questions 16–20

16foundation · easy
What is the purpose of preemption in VRRP?
Select an answer first
17application · medium
A network administrator configures VRRP on two Dell PowerSwitch switches. The administrator wants to ensure that if the backup switch is the first to boot, it does not become the master and start forwarding traffic before the preferred master switch is ready. What should the administrator configure?
Select an answer first
18foundation · easy
Which field in the VRRP advertisement packet indicates the role of the sending router?
Select an answer first
19foundation · easy
What happens when a VRRP master router becomes unavailable?
Select an answer first
20foundation · easy
What is a common reason to configure multiple VRRP groups on a single interface?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.

Describe the Operation and Behavior of the Virtual Router Redundancy Protocol POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 4)

Questions 16–20

What is the purpose of preemption in VRRP?

Which field in the VRRP advertisement packet indicates the role of the sending router?

What happens when a VRRP master router becomes unavailable?

What is a common reason to configure multiple VRRP groups on a single interface?

Keep studying — First Hop Redundancy Protocol-FHRP