What happens to a packet that does not match any of the explicit rules in an OS6 ACL?

The packet is dropped due to the implicit deny

The packet is permitted by default

The packet is logged and then permitted

The packet is forwarded to the CPU for inspection

An administrator configures an ACL with the following rules: 1. deny tcp any any eq 23 2. permit ip any any This ACL is applied inbound on an interface. What is the effect of this ACL?

All traffic is blocked because the implicit deny is at the end.

All Telnet traffic is blocked, and all other traffic is permitted.

Only Telnet traffic from the source is blocked, but Telnet to the destination is allowed.

The ACL has no effect because the permit rule is too broad.

An administrator needs to remove a single rule from an extended ACL without affecting the other rules. Which command should be used?

ip access-list extended 100 no 10

no 10 in ip access-list extended 100

An administrator wants to verify which ACLs are applied to a specific interface and in which direction. Which command should be used?

show running-config interface Gi1/0/1

What is the primary purpose of an Access Control List (ACL) on an OS6 switch?

To translate private IP addresses to public IP addresses

To provide redundancy for network links

To filter traffic based on defined criteria such as source/destination addresses or protocols

To prioritize network traffic based on QoS markings

Dell PowerSwitch Campus Deploy

Domain 5Objective 1

Configure and Verify Access Control Lists (ACLs) in OS6 POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 1)

Part of the Security domain, which accounts for 12% of the POWERSWITCH-CAMPUS-DEPLOY exam.

15questions here

3free pages

7concepts

12%of the exam

Questions 1–5

1foundation · easy
What happens to a packet that does not match any of the explicit rules in an OS6 ACL?
Select an answer first
2application · medium
An administrator configures an ACL with the following rules: 1. deny tcp any any eq 23 2. permit ip any any This ACL is applied inbound on an interface. What is the effect of this ACL?
Select an answer first
3application · medium
An administrator needs to remove a single rule from an extended ACL without affecting the other rules. Which command should be used?
Select an answer first
4application · easy
An administrator wants to verify which ACLs are applied to a specific interface and in which direction. Which command should be used?
Select an answer first
5foundation · easy
What is the primary purpose of an Access Control List (ACL) on an OS6 switch?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.