An ACL is not blocking traffic as expected. The administrator checks 'show access-lists' and sees that a deny rule has a match count of zero. What does this indicate?

The ACL is not applied to any interface

The deny rule is not being matched by the traffic it was intended to block

The switch is not forwarding traffic

What is a key difference between named and numbered ACLs in OS6?

Named ACLs cannot be applied to interfaces

Numbered ACLs can only be standard, while named ACLs can be extended

Numbered ACLs support MAC addresses, while named ACLs do not

Named ACLs use a descriptive name for identification, while numbered ACLs use a number

In an OS6 ACL, how are rules evaluated when a packet is processed?

All rules are evaluated simultaneously and the most permissive wins

In the order they were entered, top to bottom

The most specific rule is always evaluated first

An administrator needs to remove a specific rule from an existing named ACL without deleting the entire ACL. Which approach is correct in OS6?

Delete the ACL and recreate it with the desired rules

Reboot the switch to clear the ACL

Apply a new ACL to the interface to override the old one

Use the 'no' form of the specific rule's sequence number

Dell PowerSwitch Campus Deploy

Domain 5Objective 1

Configure and Verify Access Control Lists (ACLs) in OS6 POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 3)

Part of the Security domain, which accounts for 12% of the POWERSWITCH-CAMPUS-DEPLOY exam.

15questions here

3free pages

7concepts

12%of the exam

Questions 11–15

11foundation · easy
Which OS6 command displays the number of packets that have matched each rule in an ACL?
Select an answer first
12foundation · easy
An ACL is not blocking traffic as expected. The administrator checks 'show access-lists' and sees that a deny rule has a match count of zero. What does this indicate?
Select an answer first
13foundation · easy
What is a key difference between named and numbered ACLs in OS6?
Select an answer first
14foundation · easy
In an OS6 ACL, how are rules evaluated when a packet is processed?
Select an answer first
15foundation · easy
An administrator needs to remove a specific rule from an existing named ACL without deleting the entire ACL. Which approach is correct in OS6?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.