A Citrix ADC is deployed in a network with multiple routers using RIP. The administrator wants the ADC to learn routes dynamically via RIP. The ADC is connected to a router at 192.168.1.1. What must the administrator configure on the ADC?

Configure a default route to 192.168.1.1 and enable RIP on the loopback

Enable OSPF on the ADC and add the interface to area 0

Enable RIP on the ADC and add the interface to the RIP process

Add a static route for all networks via 192.168.1.1

An administrator has two routes to the same destination: a static route with metric 5 and an OSPF-learned route with metric 10. The administrator wants the static route to be preferred. What should the administrator do?

Keep the static route metric lower than the OSPF route metric

Set the OSPF route priority higher than the static route

Increase the static route metric to 15

What is the primary purpose of a static route on a Citrix ADC?

To manually direct traffic destined for a specific network to a specified next-hop gateway

To provide a backup path that is used only when the primary route fails

To load-balance traffic across multiple equal-cost paths

To automatically learn routes from neighboring routers using a routing protocol

An administrator is configuring a Citrix ADC to route traffic to the internet. The ADC has a static route for the internal corporate network 172.16.0.0/16 via 172.16.1.1. All other traffic should go to the ISP gateway at 192.168.1.1. What should the administrator configure to ensure traffic to the internet is correctly forwarded?

Add a static route for 0.0.0.0/0 with next-hop 172.16.1.1

Add a static route for 172.16.0.0/16 with next-hop 192.168.1.1

Add a default route with next-hop 192.168.1.1

Add a static route for 192.168.1.0/24 with next-hop 172.16.1.1

CitrixCertified Associate – App Delivery and Security (CCA-AppDS) – Traffic Management

Domain 2Objective 3

Configure Routing CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 3)

Part of the Domain 2: Basic Networking domain, which makes up ~10% of our current practice bank.

20questions here

4free pages

6concepts

Questions 11–15

11application · medium
A Citrix ADC is deployed in a network with multiple routers using RIP. The administrator wants the ADC to learn routes dynamically via RIP. The ADC is connected to a router at 192.168.1.1. What must the administrator configure on the ADC?
Select an answer first
12application · medium
An administrator has two routes to the same destination: a static route with metric 5 and an OSPF-learned route with metric 10. The administrator wants the static route to be preferred. What should the administrator do?
Select an answer first
13foundation · easy
Which command is used to add a static route on a Citrix ADC?
Select an answer first
14foundation · easy
What is the primary purpose of a static route on a Citrix ADC?
Select an answer first
15application · medium
An administrator is configuring a Citrix ADC to route traffic to the internet. The ADC has a static route for the internal corporate network 172.16.0.0/16 via 172.16.1.1. All other traffic should go to the ISP gateway at 192.168.1.1. What should the administrator configure to ensure traffic to the internet is correctly forwarded?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCA-APPDS-TRAFFIC-MANAGEMENT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Citrix. “CCA-APPDS-TRAFFIC-MANAGEMENT” is a trademark of its owner, used for identification only.

Configure Routing CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 3)

Questions 11–15

A Citrix ADC is deployed in a network with multiple routers using RIP. The administrator wants the ADC to learn routes dynamically via RIP. The ADC is connected to a router at 192.168.1.1. What must the administrator configure on the ADC?

An administrator has two routes to the same destination: a static route with metric 5 and an OSPF-learned route with metric 10. The administrator wants the static route to be preferred. What should the administrator do?

Which command is used to add a static route on a Citrix ADC?

What is the primary purpose of a static route on a Citrix ADC?

Keep studying — Domain 2: Basic Networking