What happens when a monitored route's next-hop gateway becomes unreachable?

The Citrix ADC sends an alert to the administrator but continues using the route

The Citrix ADC reboots to recover the route

The route is automatically removed from the routing table

The Citrix ADC automatically fails over to a backup route if one is configured

What is the purpose of setting a route metric on a Citrix ADC?

To enable route monitoring and failover

To define the administrative distance of the route

To specify the next-hop gateway for the route

To influence the selection of a route when multiple routes exist to the same destination

An administrator is troubleshooting a routing issue on a Citrix ADC. The ADC has a static route to 10.0.0.0/8 via 192.168.1.1 and a default route via 192.168.2.1. Traffic to 10.1.1.1 is not reaching the destination. The administrator wants to verify which route is being used for this traffic. What should the administrator do?

Use the 'show interface' command to check interface status

Use the 'ping' command from the ADC to 10.1.1.1

Use the 'show arp' command to check the ARP table

Use the 'show route' command and check the routing table for the specific destination

A Citrix ADC has a static route to 10.0.0.0/8 via 192.168.1.1 and a default route via 192.168.2.1. The administrator wants to ensure that traffic to 10.1.1.1 uses the static route, but traffic to 172.16.1.1 uses the default route. What should the administrator do?

Verify that the static route is more specific than the default route

Set the metric of the static route higher than the default route

Add a static route for 172.16.1.1 via 192.168.1.1

CitrixCertified Associate – App Delivery and Security (CCA-AppDS) – Traffic Management

Domain 2Objective 3

Configure Routing CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 1)

Part of the Domain 2: Basic Networking domain, which makes up ~10% of our current practice bank.

20questions here

4free pages

6concepts

Questions 1–5

1foundation · easy
Which of the following is a dynamic routing protocol supported by Citrix ADC?
Select an answer first
2foundation · easy
What happens when a monitored route's next-hop gateway becomes unreachable?
Select an answer first
3foundation · easy
What is the purpose of setting a route metric on a Citrix ADC?
Select an answer first
4expert · hard
An administrator is troubleshooting a routing issue on a Citrix ADC. The ADC has a static route to 10.0.0.0/8 via 192.168.1.1 and a default route via 192.168.2.1. Traffic to 10.1.1.1 is not reaching the destination. The administrator wants to verify which route is being used for this traffic. What should the administrator do?
Select an answer first
5expert · hard
A Citrix ADC has a static route to 10.0.0.0/8 via 192.168.1.1 and a default route via 192.168.2.1. The administrator wants to ensure that traffic to 10.1.1.1 uses the static route, but traffic to 172.16.1.1 uses the default route. What should the administrator do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCA-APPDS-TRAFFIC-MANAGEMENT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Citrix. “CCA-APPDS-TRAFFIC-MANAGEMENT” is a trademark of its owner, used for identification only.

Configure Routing CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 1)

Questions 1–5

Which of the following is a dynamic routing protocol supported by Citrix ADC?

What happens when a monitored route's next-hop gateway becomes unreachable?

What is the purpose of setting a route metric on a Citrix ADC?

A Citrix ADC has a static route to 10.0.0.0/8 via 192.168.1.1 and a default route via 192.168.2.1. The administrator wants to ensure that traffic to 10.1.1.1 uses the static route, but traffic to 172.16.1.1 uses the default route. What should the administrator do?

Keep studying — Domain 2: Basic Networking