Manage IP Addressing CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   An administrator notices that a Citrix ADC SNIP (192.168.20.5) is conflicting with a DHCP server that has assigned the same address to a workstation. Which step should be taken first to resolve the conflict?

   • AChange the SNIP to a different address on the same subnet.
   • BDisable the DHCP server on the workstation.
   • CExclude the SNIP address from the DHCP scope on the DHCP server.
   • DReboot the Citrix ADC to refresh its ARP cache.
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A Citrix ADC is deployed in a cloud environment where the underlying infrastructure assigns IP addresses dynamically. The administrator wants to ensure the ADC's management IP (NSIP) remains stable across reboots. What is the recommended approach?

   • AUse DHCP for the NSIP and rely on the cloud's default lease time.
   • BUse a MIP for management access.
   • CAssign a VIP as the management IP.
   • DConfigure the NSIP as a static IP address in the ADC and reserve the same IP in the cloud DHCP service.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   Given the IP address 192.168.10.35 with a subnet mask of 255.255.255.0, what is the network address?

   • A192.168.0.0
   • B192.168.10.35
   • C192.168.10.255
   • D192.168.10.0
   Reveal Solution Discussion Select an answer first
5. 4expert · hard

   A Citrix ADC has a VIP 192.168.100.10 and a SNIP 192.168.100.11 on the same subnet. The administrator receives reports of intermittent failures. The ADC's ARP table shows the VIP's MAC address is 00:0c:29:aa:bb:cc, but the switch's MAC table shows the same IP associated with a different MAC address. What is the most likely cause and immediate action?

   • AThe ADC's ARP cache is corrupted; clear the ARP cache on the ADC.
   • BIP conflict: another device has the same IP; check the switch's MAC table and isolate the conflicting device.
   • CThe SNIP is not responding to ARP; reboot the ADC.
   • DThe VIP is not bound to a service; bind the service to the VIP.
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A Citrix ADC has a VIP 10.10.10.10 with a subnet mask of 255.255.255.0. The ADC is also configured with a SNIP 10.10.10.11. A client on 10.10.11.5/24 sends a request to the VIP. The ADC responds, but the client cannot receive the response. What is the most likely cause?

   • AThe client and VIP are on different subnets; the ADC's VIP is not reachable from the client's subnet without a route.
   • BThe SNIP is on the same subnet as the VIP, causing a routing conflict.
   • CThe ADC's ARP cache is stale; clear the ARP cache on the ADC.
   • DThe VIP's subnet mask is incorrect; it should be /16 to cover both subnets.
   Reveal Solution Discussion Select an answer first