After capturing a call trace in RTMT, what is the primary purpose of analyzing the trace to troubleshoot a dial plan issue?

To determine the exact point where the call routing deviates from the expected path

To measure the voice quality of the call

To verify the phone's firmware version

To identify the IP address of the called party

You are troubleshooting a call routing issue where calls to a specific route pattern are being blocked. You need to see the real-time call activity and trace a specific call through the system. Which RTMT feature would you use to monitor the call activity and trace the call simultaneously?

CallManager Trace and Log Central

A call trace shows that a translation pattern is not being applied to a call, causing the call to be routed with the wrong digits. What corrective action should you take?

Restart the CallManager service

Verify that the translation pattern is in a partition accessible to the calling device

Increase the number of digits in the route pattern

You need to verify whether a specific translation pattern is being matched for calls to a particular prefix. You have CLI access to the Cisco Unified Communications Manager publisher. Which CLI command would you use to inspect the configured translation patterns?

run sql select * from translationpattern

CiscoCertified Network Professional Collaboration

Domain 3Objective 4

3.4 Troubleshoot Misconfigured Dial Plan Issues Using Monitoring Tools 350-801 Practice Questions (Page 2)

Part of the On-Premises Call Control domain, which accounts for 30% of the 350-801 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~15–24 in this domain), expect 2–3 from this objective — we provide 22 practice questions to prepare you well beyond it. (estimate)

22questions here

5free pages

8concepts

30%of the exam

8 Concepts in This Objective

Dial plan misconfiguration symptoms
Monitoring tools overview
Using RTMT for dial plan troubleshooting
Using CLI for dial plan troubleshooting
Analyzing CDR and CMR records
Tracing calls with monitoring tools
Common dial plan misconfigurations
Corrective actions for dial plan issues

Questions 6–10

6foundation · easy
Which type of record provides quality metrics such as jitter, packet loss, and latency for a call, which can help diagnose voice quality issues that may be related to dial plan routing?
Select an answer first
7foundation · easy
After capturing a call trace in RTMT, what is the primary purpose of analyzing the trace to troubleshoot a dial plan issue?
Select an answer first
8application · medium
You are troubleshooting a call routing issue where calls to a specific route pattern are being blocked. You need to see the real-time call activity and trace a specific call through the system. Which RTMT feature would you use to monitor the call activity and trace the call simultaneously?
Select an answer first
9foundation · easy
A call trace shows that a translation pattern is not being applied to a call, causing the call to be routed with the wrong digits. What corrective action should you take?
Select an answer first
10application · medium
You need to verify whether a specific translation pattern is being matched for calls to a particular prefix. You have CLI access to the Cisco Unified Communications Manager publisher. Which CLI command would you use to inspect the configured translation patterns?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-801

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-801” is a trademark of its owner, used for identification only.