3.1 Describe the Call Routing Process in Cisco UCM 350-801 Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   What is the primary purpose of a route pattern in Cisco UCM?

   • ATo define the dial plan for a specific device pool
   • BTo match dialed digits and direct the call to a route list or gateway
   • CTo group gateways in a prioritized order
   • DTo translate dialed digits into a different number before routing
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A company has a single Cisco UCM cluster with two PSTN gateways: a primary T1 PRI gateway and a backup analog gateway for failover. They want all external calls to use the PRI first, and only overflow to the analog gateway if the PRI is unavailable. The administrator creates a route pattern '9.@' and assigns it to a route list. What must be configured in the route list to achieve this behavior?

   • ACreate two separate route patterns, one for the PRI and one for the analog, and assign each to its own gateway.
   • BAdd both gateways to a single route group, with the PRI gateway listed first in the group.
   • CAdd the PRI gateway to a route group, add the analog gateway to a second route group, and add both route groups to the route list in that order.
   • DAssign the route pattern directly to the PRI gateway and configure the analog gateway as a secondary in the gateway settings.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   Which route pattern would match a seven-digit local number that begins with 555?

   • A555XXXX
   • B555[0-9]
   • C555!
   • D555#
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What is the purpose of a route filter in Cisco UCM?

   • ATo translate the called number before routing
   • BTo restrict which numbers are allowed to match a route pattern
   • CTo prioritize gateways in a route group
   • DTo match dialed digits and direct calls to a gateway
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A user in a Cisco UCM cluster dials '9-1-408-555-0123'. The administrator has configured a route pattern '9.@' that points to a route list. The route list contains a route group with a single gateway. Which of the following describes the correct sequence of events that occurs after the user presses the 'Dial' key?

   • ACisco UCM immediately sends the call to the route list, which then performs digit analysis to match the route pattern.
   • BThe phone directly sends the call to the gateway, which then forwards the digits to Cisco UCM for pattern matching.
   • CThe gateway performs digit analysis and then sends the call to Cisco UCM for authorization.
   • DThe phone sends the dialed digits to Cisco UCM, which performs digit analysis to match the pattern '9.@', then the route list selects the route group, and the gateway is used to place the call.
   Reveal Solution Discussion Select an answer first