When a user dials a number, what does Cisco UCM do first?

Send the call to the route list

Apply a translation pattern to the dialed digits

Select a gateway from a route group

Perform digit analysis to match the dialed digits to a route pattern

A company has two Cisco UCM gateways connected to the PSTN. Gateway A is a high-capacity T1 PRI, and Gateway B is a lower-capacity BRI. The administrator wants to load-balance calls across both gateways, but if one gateway is down, all calls should still go to the other. What is the correct configuration to achieve this?

Create two separate route groups, one for each gateway, and add both to a route list.

Create two separate route patterns, one for each gateway, and assign them to different route lists.

Create a route group containing both gateways and assign it to a route list.

Create a route list with both gateways directly added to it.

What is the correct order of steps in the call routing flow in Cisco UCM?

Route pattern match, digit analysis, gateway selection, route list selection

Digit analysis, route pattern match, route list selection, gateway selection

Route list selection, digit analysis, route pattern match, gateway selection

Gateway selection, route pattern match, digit analysis, route list selection

In Cisco UCM, what is the purpose of a route group?

To provide a prioritized list of gateways for a specific set of calls

To translate dialed digits before routing

To contain a prioritized list of route lists

To match dialed digits and direct calls to a route list

CiscoCertified Network Professional Collaboration

Domain 3Objective 1

3.1 Describe the Call Routing Process in Cisco UCM 350-801 Practice Questions (Page 2)

Part of the On-Premises Call Control domain, which accounts for 30% of the 350-801 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~15–24 in this domain), expect 2–3 from this objective — we provide 15 practice questions to prepare you well beyond it. (estimate)

15questions here

3free pages

6concepts

30%of the exam

Questions 6–10

6foundation · easy
When a user dials a number, what does Cisco UCM do first?
Select an answer first
7application · medium
A company has two Cisco UCM gateways connected to the PSTN. Gateway A is a high-capacity T1 PRI, and Gateway B is a lower-capacity BRI. The administrator wants to load-balance calls across both gateways, but if one gateway is down, all calls should still go to the other. What is the correct configuration to achieve this?
Select an answer first
8foundation · easy
What is the correct order of steps in the call routing flow in Cisco UCM?
Select an answer first
9foundation · easy
In Cisco UCM, what is the purpose of a route group?
Select an answer first
10foundation · easy
Which Cisco UCM component is a prioritized list of route groups that is used to select the order in which gateways are tried for a call?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-801

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-801” is a trademark of its owner, used for identification only.

3.1 Describe the Call Routing Process in Cisco UCM 350-801 Practice Questions (Page 2)

Questions 6–10

When a user dials a number, what does Cisco UCM do first?

What is the correct order of steps in the call routing flow in Cisco UCM?

In Cisco UCM, what is the purpose of a route group?

Which Cisco UCM component is a prioritized list of route groups that is used to select the order in which gateways are tried for a call?

Keep studying — On-Premises Call Control