What is the primary function of a SIP profile on an IOS XE voice gateway?

To modify SIP message headers and parameters to ensure interoperability with other SIP devices.

To set the maximum number of concurrent SIP calls.

To configure the SIP trunk's transport protocol (UDP or TCP).

To define the codec and jitter buffer settings for SIP calls.

A multi-tenant gateway has two tenants, each with its own SIP trunk. Tenant A's trunk requires the 'User-Agent' header to be removed, while Tenant B's trunk requires it to be set to 'CustomAgent'. The administrator has created two SIP profiles, but both are being applied to the same outbound dial peer. What is the most likely result?

The gateway will reject the configuration because two SIP profiles cannot be applied to the same dial peer

The SIP profiles will be applied in the order they were configured, and the last one will override the first

Only one SIP profile can be applied to a dial peer, so the other tenant's calls will not have the correct header

Both SIP profiles will be applied, and the gateway will merge the header changes

What is the purpose of the 'tenant' configuration on an IOS XE voice gateway?

To enable the gateway to act as a SIP registrar for multiple domains.

To allocate a separate IP address for each SIP trunk.

To increase the maximum number of concurrent calls the gateway can handle.

To isolate and manage dial plans and resources for different customers or departments on a single gateway.

CiscoCertified Network Professional Collaboration

Domain 4Objective 2

4.2 Troubleshoot IOS XE Dial Plans Such as Dial Peer Matching, Translation Rules, SIP Profiles, and Tenants 350-801 Practice Questions (Page 2)

Part of the Voice Gateways and Session Border Controllers domain, which accounts for 10% of the 350-801 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 2–3 from this objective — we provide 10 practice questions to prepare you well beyond it. (estimate)

10questions here

2free pages

4concepts

10%of the exam

Questions 6–10

6foundation · easy
What is the primary function of a SIP profile on an IOS XE voice gateway?
Select an answer first
7foundation · easy
Which command is used to enter tenant configuration mode on an IOS XE voice gateway?
Select an answer first
8foundation · easy
Which command is used to apply a SIP profile to a VoIP dial peer on an IOS XE gateway?
Select an answer first
9expert · hard
A multi-tenant gateway has two tenants, each with its own SIP trunk. Tenant A's trunk requires the 'User-Agent' header to be removed, while Tenant B's trunk requires it to be set to 'CustomAgent'. The administrator has created two SIP profiles, but both are being applied to the same outbound dial peer. What is the most likely result?
Select an answer first
10foundation · easy
What is the purpose of the 'tenant' configuration on an IOS XE voice gateway?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to 350-801

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-801” is a trademark of its owner, used for identification only.

4.2 Troubleshoot IOS XE Dial Plans Such as Dial Peer Matching, Translation Rules, SIP Profiles, and Tenants 350-801 Practice Questions (Page 2)

Questions 6–10

What is the primary function of a SIP profile on an IOS XE voice gateway?

Which command is used to enter tenant configuration mode on an IOS XE voice gateway?

Which command is used to apply a SIP profile to a VoIP dial peer on an IOS XE gateway?

What is the purpose of the 'tenant' configuration on an IOS XE voice gateway?

Keep studying — Voice Gateways and Session Border Controllers