4.1 Deploy CMX and Cisco Spaces on a Wireless Network 300-430 Practice Questions (Page 8)

Questions 36–40

1. 36expert · medium

   An enterprise is running CMX on-premises for location analytics and now wants to also use Cisco Spaces for additional cloud-based analytics. They have a mix of AireOS and IOS XE controllers. They want to avoid duplicate location data and ensure both platforms receive data. Which deployment approach should they choose?

   • AUse a third-party middleware to aggregate data from all controllers and send to both CMX and Cisco Spaces.
   • BConnect all controllers to CMX and then configure CMX to forward data to Cisco Spaces, ensuring all data flows through CMX.
   • CConnect AireOS controllers to CMX and configure CMX to forward data to Cisco Spaces; connect IOS XE controllers directly to Cisco Spaces.
   • DConnect all controllers directly to Cisco Spaces and disable CMX to avoid duplication.
   Reveal Solution Discussion Select an answer first
2. 37foundation · easy

   During the initial setup of Cisco CMX, which of the following is a required step?

   • AConfiguring a RADIUS server for client authentication
   • BInstalling a third-party antivirus software
   • CCreating a new wireless SSID for location services
   • DConfiguring the CMX IP address and network settings
   Reveal Solution Discussion Select an answer first
4. 38application · medium

   A company wants to use Cisco Spaces to provide location analytics for its wireless network. They currently have a Cisco 9800 wireless LAN controller running IOS XE 17.3 and a CMX appliance already deployed. They have created a Cisco Spaces account and want to connect their wireless infrastructure. What must be done to enable Cisco Spaces to receive location data from the wireless network?

   • AInstall a CMX virtual appliance in the cloud and connect it to the 9800 controller via a site-to-site VPN to forward data to Cisco Spaces.
   • BConfigure the 9800 controller to send location data directly to Cisco Spaces using the built-in connector, and ensure the controller has outbound internet access to the Cisco Spaces cloud.
   • CConfigure the access points to send location data directly to Cisco Spaces using a new SSID with a location tag.
   • DUse the CMX appliance to forward location data to Cisco Spaces by enabling the CMX-to-Spaces connector on the CMX.
   Reveal Solution Discussion Select an answer first
5. 39foundation · easy

   What is a common method to validate the accuracy of a location service deployment?

   • AChecking that the CMX server has a public IP address
   • BEnsuring the wireless controller is running the latest firmware
   • CComparing the reported location of a known device to its actual physical position
   • DVerifying that all access points are on the same channel
   Reveal Solution Discussion Select an answer first
6. 40foundation · easy

   Which of the following is a hardware prerequisite for deploying Cisco CMX?

   • AA dedicated Cisco UCS server
   • BA supported server platform meeting the minimum CPU, memory, and disk specifications
   • CA Cisco Catalyst 9800 Series Wireless Controller
   • DA physical appliance with at least 8 GB of RAM
   Reveal Solution Discussion Select an answer first