Which of the following indicates that the location service is functioning correctly?

The wireless controller shows all access points in 'Up' state

The CMX dashboard shows real-time location of Wi-Fi clients

The Cisco Spaces portal shows the network as 'Connected'

The CMX server has a static IP address

When deploying both CMX and Cisco Spaces, what is a key consideration for coexistence?

CMX must be disabled when using Cisco Spaces

Both platforms can receive data from the same controller simultaneously

They must use different wireless controllers

Cisco Spaces requires CMX to function

An administrator is installing CMX on a physical appliance. The appliance has two network interfaces. The installation guide instructs to use one interface for management and the other for location data. After installation, the administrator notices that the location service is not receiving data from the controller. What is the most likely cause?

The management interface is not connected to the network.

The location interface is configured with the wrong IP address or subnet.

The controller is configured with the management interface IP address.

The appliance does not have enough RAM for the location service.

A company is deploying CMX on a virtual machine. They have a Cisco 9800 controller. What is a prerequisite for CMX to receive location data from the controller?

The access points must be configured to send data directly to CMX.

The CMX must be reachable from the controller's management interface over the network.

The controller must be running the latest IOS XE version.

The CMX must have a public IP address.

When onboarding a wireless controller to Cisco Spaces, what is typically required?

The MAC address of every access point

The controller's IP address and credentials

A DNS SRV record for the controller

CiscoCertified Network Professional Enterprise Wireless (ENWLSI)

Domain 4Objective 1

4.1 Deploy CMX and Cisco Spaces on a Wireless Network 300-430 Practice Questions (Page 5)

Part of the Location Services domain, which accounts for 10% of the 300-430 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 2–3 from this objective — we provide 42 practice questions to prepare you well beyond it. (estimate)

42questions here

9free pages

7concepts

10%of the exam

Questions 21–25

21foundation · easy
Which of the following indicates that the location service is functioning correctly?
Select an answer first
22foundation · easy
When deploying both CMX and Cisco Spaces, what is a key consideration for coexistence?
Select an answer first
23application · medium
An administrator is installing CMX on a physical appliance. The appliance has two network interfaces. The installation guide instructs to use one interface for management and the other for location data. After installation, the administrator notices that the location service is not receiving data from the controller. What is the most likely cause?
Select an answer first
24application · medium
A company is deploying CMX on a virtual machine. They have a Cisco 9800 controller. What is a prerequisite for CMX to receive location data from the controller?
Select an answer first
25foundation · easy
When onboarding a wireless controller to Cisco Spaces, what is typically required?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 300-430

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “300-430” is a trademark of its owner, used for identification only.