A logistics company wants to track forklifts equipped with Wi-Fi clients in a large warehouse. The warehouse has APs mounted on the ceiling at a height of 8 meters. The required accuracy is 5 meters. The engineer has enabled client tracking. Which additional configuration will improve location accuracy?

Configure the APs to use a shorter beacon interval

Ensure the client sends frequent probe requests and the APs report RSSI to the controller

Decrease the AP transmit power to reduce the number of APs that hear the client

Increase the AP transmit power to ensure the client is heard by more APs

A factory has a mix of Wi-Fi devices and non-Wi-Fi machinery that causes interference. The network team has enabled spectrum analysis on all access points. They have identified a non-Wi-Fi interferer that appears to move. They also suspect a rogue AP is present. The location engine reports the interferer's location with an accuracy of about 5 meters. The team needs to pinpoint the interferer to within 1 meter to find the device. Which approach is most effective?

Use a handheld spectrum analyzer to walk the area and pinpoint the interferer.

Enable ToF-based tracking for the interferer.

Increase the number of access points in the area to improve the location engine's accuracy.

Use rogue AP detection to locate the interferer as a rogue AP.

A casino has a rogue AP that is only active for 5 minutes every hour. The rogue is on a non-overlapping channel. The casino's APs are configured to scan all channels, but the rogue is not being detected consistently. The security team wants to locate the rogue. What is the most effective way to improve detection and location?

Decrease the AP scan dwell time to scan more frequently

Increase the AP scan dwell time on each channel

Configure the APs to use monitor mode exclusively

Use spectrum analysis to detect the rogue's signal

A mall operator uses Cisco DNA Center to provide a wayfinding app. The app needs to receive the location of a shopper's phone. The phone is associated to the Wi-Fi network. Which API should the developer use to obtain the shopper's location?

Use the client's browser geolocation API

Use the controller's SNMP interface to poll client location OIDs

Use the Cisco DNA Center Location API to query the location of the client by MAC address

Use the rogue AP location API to find the client

A network engineer needs to locate a non-Wi-Fi interferer, such as a microwave oven, that is disrupting the wireless network. Which Cisco wireless feature is specifically designed to detect and locate such interferers?

Rogue AP detection using the controller's rogue list

Spectrum analysis on access points with a dedicated scanning radio

Client location using RSSI triangulation

Wired-side packet capture to identify the source of interference

CiscoCertified Network Professional Enterprise Wireless (ENWLSI)

Domain 4Objective 2

4.2 Implement Location Services 300-430 Practice Questions (Page 1)

Part of the Location Services domain, which accounts for 10% of the 300-430 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 2–3 from this objective — we provide 30 practice questions to prepare you well beyond it. (estimate)

30questions here

6free pages

6concepts

10%of the exam

Questions 1–5

1application · medium
A logistics company wants to track forklifts equipped with Wi-Fi clients in a large warehouse. The warehouse has APs mounted on the ceiling at a height of 8 meters. The required accuracy is 5 meters. The engineer has enabled client tracking. Which additional configuration will improve location accuracy?
Select an answer first
2expert · hard
A factory has a mix of Wi-Fi devices and non-Wi-Fi machinery that causes interference. The network team has enabled spectrum analysis on all access points. They have identified a non-Wi-Fi interferer that appears to move. They also suspect a rogue AP is present. The location engine reports the interferer's location with an accuracy of about 5 meters. The team needs to pinpoint the interferer to within 1 meter to find the device. Which approach is most effective?
Select an answer first
3expert · hard
A casino has a rogue AP that is only active for 5 minutes every hour. The rogue is on a non-overlapping channel. The casino's APs are configured to scan all channels, but the rogue is not being detected consistently. The security team wants to locate the rogue. What is the most effective way to improve detection and location?
Select an answer first
4application · medium
A mall operator uses Cisco DNA Center to provide a wayfinding app. The app needs to receive the location of a shopper's phone. The phone is associated to the Wi-Fi network. Which API should the developer use to obtain the shopper's location?
Select an answer first
5foundation · easy
A network engineer needs to locate a non-Wi-Fi interferer, such as a microwave oven, that is disrupting the wireless network. Which Cisco wireless feature is specifically designed to detect and locate such interferers?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 300-430

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “300-430” is a trademark of its owner, used for identification only.

4.2 Implement Location Services 300-430 Practice Questions (Page 1)

Questions 1–5

A mall operator uses Cisco DNA Center to provide a wayfinding app. The app needs to receive the location of a shopper's phone. The phone is associated to the Wi-Fi network. Which API should the developer use to obtain the shopper's location?

A network engineer needs to locate a non-Wi-Fi interferer, such as a microwave oven, that is disrupting the wireless network. Which Cisco wireless feature is specifically designed to detect and locate such interferers?

Keep studying — Location Services