4.2 Implement Location Services 300-430 Practice Questions (Page 2)

Questions 6–10

1. 6application · medium

   A manufacturing plant reports intermittent Wi-Fi interference in the assembly area. The engineer suspects a non-Wi-Fi device. Using Cisco Prime Infrastructure, the engineer sees a spectrum alert but needs to locate the interferer. Which feature should the engineer use to estimate the interferer's physical location?

   • AUse the location triangulation of the interferer based on RSSI from multiple APs
   • BUse the spectrum analysis 'interferer location' feature that correlates signal strength from multiple APs
   • CUse the RFID tag location feature to locate the interferer
   • DUse the rogue AP location feature to locate the interferer
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   A wireless engineer needs to explain to a colleague how a Cisco wireless network determines the location of a client that is not transmitting any special location frames. Which technique is most commonly used by the wireless infrastructure to estimate the client's position in this scenario?

   • AAnalyzing the client's MAC address to look up its physical location in a public database
   • BMeasuring the signal strength (RSSI) of the client's transmissions as received by multiple access points
   • CUsing the client's GPS coordinates, which are embedded in every Wi-Fi probe request
   • DReading the client's IP address and mapping it to a fixed physical port on the switch
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A warehouse uses Cisco 9130AXI APs and wants to track active RFID tags attached to pallets. The tags transmit at 433 MHz. The engineer has enabled RFID tag tracking on the controller. What additional configuration is required for the APs to detect these tags?

   • AConfigure the APs to scan the 433 MHz band using their spectrum analysis radio
   • BConfigure the APs to use their BLE radio to receive the RFID tag transmissions
   • CEnsure the APs have a compatible RFID module installed and enabled
   • DEnable client tracking on the 2.4 GHz radio to detect the RFID tags
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A manufacturing plant reports intermittent Wi-Fi drops in a specific assembly area. A site survey with a spectrum analyzer shows a strong non-Wi-Fi signal at 2.4 GHz that appears to move. The network team wants to locate the source using the existing wireless infrastructure. Which feature should be used?

   • AEnable spectrum analysis on nearby access points and use the location engine to triangulate the interferer.
   • BUse the rogue AP detection feature to locate the interferer as a rogue AP.
   • CDeploy a dedicated handheld spectrum analyzer and manually walk the area to find the source.
   • DEnable client tracking and look for the interferer as a rogue client.
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   When using a Cisco location reporting tool to view client location data, what information is typically displayed for each tracked client?

   • AThe client's estimated x,y coordinates on a floor map, along with its MAC address and associated AP
   • BThe client's complete browsing history and visited websites
   • CThe client's IP address and the switch port it is connected to
   • DThe client's signal-to-noise ratio and data rate for every packet transmitted
   Reveal Solution Discussion Select an answer first