Configure ONTAP System Networking CERTIFIED-STORAGE-INSTALLATION-ENGINEER-ONTAP Practice Questions (Page 5)

Questions 21–25

1. 21foundation · easy

   What is the primary purpose of creating an interface group (ifgrp) in ONTAP?

   • ATo create a virtual LAN for segmenting traffic
   • BTo assign IP addresses to physical ports
   • CTo provide link aggregation and failover for physical ports
   • DTo enable routing between different subnets
   Reveal Solution Discussion Select an answer first
2. 22application · medium

   A company has a single physical network port on each node of a two-node cluster. They need to separate NFS client traffic from iSCSI storage traffic at Layer 2. The network team has already configured VLAN 100 for NFS and VLAN 200 for iSCSI on the upstream switches. What should the ONTAP administrator do to enable both types of traffic on the existing physical ports?

   • ACreate a single LIF with an IP address from each VLAN subnet.
   • BCreate VLAN interfaces on the physical ports for VLAN 100 and 200, then create LIFs on those VLAN interfaces.
   • CCreate two IPspaces and assign each physical port to a different IPspace.
   • DUse the 'network port modify -vlan-id' command to tag the physical port with both VLANs.
   Reveal Solution Discussion Select an answer first
4. 23application · medium

   An administrator has created an interface group (ifgrp) with four ports and assigned several data LIFs to it. The administrator notices that all traffic is being sent over only one physical port in the ifgrp, while the other three ports are idle. What should the administrator do to distribute traffic across all ports?

   • AChange the ifgrp's load-balancing policy to a different method, such as 'ip' or 'sequential'.
   • BIncrease the number of LIFs on the ifgrp.
   • CReboot the node to reset the ifgrp's traffic distribution.
   • DEnable the 'network port ifgrp modify -auto-revert' option.
   Reveal Solution Discussion Select an answer first
5. 24foundation · easy

   What is the purpose of an IPspace in ONTAP?

   • ATo provide isolated routing and addressing domains within a cluster
   • BTo combine multiple physical ports for increased bandwidth
   • CTo provide failover for LIFs
   • DTo segment traffic into separate broadcast domains
   Reveal Solution Discussion Select an answer first
6. 25application · medium

   A two-node ONTAP cluster has a data LIF on node1 that currently serves NFS clients. The administrator wants to ensure that if node1 fails, the LIF moves to node2 and continues serving traffic. The LIF is currently in the default failover group. What should the administrator do to meet this requirement?

   • ACreate a new data LIF on node2 with the same IP address.
   • BChange the LIF's home port to a port on node2.
   • CModify the LIF's failover group to include node2 and its ports.
   • DEnable the 'failover' option on the LIF using the network interface modify command.
   Reveal Solution Discussion Select an answer first