Examers.io
ExamsOrganizationsHow it worksPricingHelp & FAQ
Juniper Networks logo

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 4Objective 2

EVPN Multicast JN0-683 Practice Questions (Page 2)

Part of the EVPN-VXLAN Signaling domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here
4free pages
6concepts

Questions 6–10

  1. 6application · medium

    A service provider is designing an EVPN-VXLAN fabric for a multi-tenant data center. The requirement is to support multicast for a large number of groups with minimal control-plane overhead and no dependence on underlay multicast. The design must also allow multicast forwarding to be optimized per group. Which multicast mode should be selected?

    Select an answer first
  2. 7application · medium

    A data center is deploying EVPN-VXLAN with multicast. The underlay supports IP multicast, and the design goal is to minimize the amount of multicast state in the underlay. Which approach should be used for BUM traffic forwarding?

    Select an answer first
  3. 8application · medium

    A data center is deploying EVPN-VXLAN with multicast. The underlay does not support IP multicast, but the design requires that multicast traffic be delivered only to VTEPs with active receivers. Which forwarding mechanism should be used?

    Select an answer first
  4. 9application · medium

    An administrator is troubleshooting an EVPN-VXLAN multicast issue where a receiver is not receiving traffic for a group. The VTEP has learned the group via IGMP snooping, but the remote VTEP is not receiving the multicast. Which command should the administrator use to verify that the local VTEP is originating the correct EVPN routes?

    Select an answer first
  5. 10application · medium

    A large data center is deploying EVPN-VXLAN with multicast. The design requires that multicast traffic between subnets be optimized, with the ability to forward traffic directly between VTEPs without hair-pinning through a central gateway. Which multicast mode should be used?

    Select an answer first
Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.