Juniper NetworksCertified Professional, Data Center (JNCIP-DC)
Domain 4Objective 7
Configure, Monitor, or Troubleshoot EVPNs JN0-683 Practice Questions (Page 1)
Part of the EVPN-VXLAN Signaling domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 17 practice questions to prepare you well beyond it. (estimate)
17questions here
4free pages
6concepts
Questions 1–5
- 1
Which Junos CLI command displays the EVPN route table, including route types and next-hop information?
Select an answer first - 2
When a VTEP learns a new MAC address from its local access interface, what does it do in an EVPN-VXLAN fabric?
Select an answer first - 3
Which Junos command is used to check the VXLAN tunnel status, including whether the tunnel is up and the source/destination IP addresses?
Select an answer first - 4
An engineer is configuring a new leaf switch in an EVPN-VXLAN fabric. The leaf will host VMs in VLAN 100, which maps to VNI 10100. The underlay is already configured with OSPF and BGP. Which configuration is required on the leaf to enable EVPN signaling for this VLAN?
Select an answer first - 5
What information is carried in an EVPN route type 2 advertisement that allows remote VTEPs to forward traffic to the correct destination?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.