A network architect is designing a new EVPN-VXLAN fabric and is deciding between using traditional BGP (IPv4 unicast) and Multiprotocol BGP (MBGP) for the control plane. The fabric will carry both MAC/IP routes (type-2) and IP prefix routes (type-5) for multiple VRFs. What is the primary advantage of using MBGP over traditional BGP in this design?

MBGP supports multiple address families over a single session, allowing EVPN routes to be carried alongside IPv4 unicast routes.

MBGP automatically configures VXLAN tunnels, while traditional BGP requires manual tunnel configuration.

MBGP allows the use of route reflectors, while traditional BGP requires a full mesh.

MBGP provides faster convergence than traditional BGP for MAC learning.

What is the purpose of a Route Distinguisher (RD) in an EVPN-VXLAN fabric?

To specify the next hop for EVPN routes

To make EVPN routes unique across different VRFs or tenants

To enable VXLAN encapsulation on the data plane

To control which routes are imported into a VRF

A network architect is explaining to a junior engineer why MBGP is used for EVPN-VXLAN signaling instead of a separate routing protocol. The architect needs to highlight a key advantage of MBGP. Which statement accurately describes an advantage of MBGP in this context?

MBGP allows the same session to carry both underlay and overlay routes, reducing the number of sessions.

MBGP automatically creates VXLAN tunnels based on the EVPN routes.

MBGP provides a faster convergence time than OSPF for MAC learning.

MBGP eliminates the need for a separate underlay routing protocol.

Which Junos command is used to verify the state of a BGP session and confirm that the EVPN address family is negotiated?

show route advertising-protocol bgp

show configuration protocols bgp

Which EVPN route type is used to advertise MAC and IP address information for a host?

Type 1 (Ethernet Auto-Discovery)

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 4Objective 3

Multiprotocol BGP (MBGP) JN0-683 Practice Questions (Page 1)

Part of the EVPN-VXLAN Signaling domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

7concepts

Questions 1–5

1application · medium
A network architect is designing a new EVPN-VXLAN fabric and is deciding between using traditional BGP (IPv4 unicast) and Multiprotocol BGP (MBGP) for the control plane. The fabric will carry both MAC/IP routes (type-2) and IP prefix routes (type-5) for multiple VRFs. What is the primary advantage of using MBGP over traditional BGP in this design?
Select an answer first
2foundation · easy
What is the purpose of a Route Distinguisher (RD) in an EVPN-VXLAN fabric?
Select an answer first
3application · medium
A network architect is explaining to a junior engineer why MBGP is used for EVPN-VXLAN signaling instead of a separate routing protocol. The architect needs to highlight a key advantage of MBGP. Which statement accurately describes an advantage of MBGP in this context?
Select an answer first
4foundation · easy
Which Junos command is used to verify the state of a BGP session and confirm that the EVPN address family is negotiated?
Select an answer first
5foundation · easy
Which EVPN route type is used to advertise MAC and IP address information for a host?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-683

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.