Juniper NetworksCertified Professional, Data Center (JNCIP-DC)
Domain 3Objective 1
VXLAN Control Planes JN0-683 Practice Questions (Page 1)
Part of the VXLAN domain, which makes up ~8% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~3–5 in this domain), expect 1–2 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)
26questions here
6free pages
7concepts
Questions 1–5
- 1
In a multicast-based VXLAN control plane, what is the role of multicast groups?
Select an answer first - 2
What information from the EVPN control plane is used to determine the destination VTEP for a VXLAN tunnel?
Select an answer first - 3
A network architect is comparing BGP EVPN and multicast-based VXLAN for a small data center with 20 VTEPs and 5 tenants. The underlay is already multicast-enabled for other services. The architect wants to minimize the number of new protocols introduced. Which control plane approach should be chosen?
Select an answer first - 4
A network engineer is troubleshooting a VXLAN EVPN fabric where a host's MAC address is not being learned by remote VTEPs. The engineer verifies that the local leaf has the MAC in its forwarding table and that the BGP session is up. The engineer also confirms that the VNI is configured for EVPN. What is the most likely remaining cause?
Select an answer first - 5
Which EVPN route type is used to advertise IP prefixes for inter-subnet routing in a VXLAN environment?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.