Which BGP EVPN route type is used to advertise the multicast group or ingress replication list for BUM traffic?

Type 2 (MAC/IP Advertisement route)

Type 3 (Inclusive Multicast Ethernet Tag route)

Type 1 (Ethernet Auto-Discovery route)

A network engineer is configuring multicast-based VXLAN for a new tenant. The engineer has created a new VNI and needs to ensure that BUM traffic for this tenant is only sent to VTEPs that have ports in this VNI. What must be configured on the VTEPs?

Each VTEP must be configured with the same VNI ID

Each VTEP must be configured with BGP EVPN to advertise the VNI

Each VTEP must join the multicast group mapped to this VNI

Each VTEP must be configured with a static tunnel to the multicast group

In BGP EVPN for VXLAN, what is the purpose of EVPN route type 2?

To advertise IP prefixes for inter-subnet routing.

To advertise the multicast group used for BUM traffic.

To discover VTEPs and establish VXLAN tunnels.

To advertise MAC and optionally IP addresses associated with an endpoint.

In EVPN, which route type is responsible for advertising both MAC addresses and their associated IP addresses?

Type 2 (MAC/IP Advertisement route)

Type 3 (Inclusive Multicast Ethernet Tag route)

Type 4 (Ethernet Segment route)

In a VXLAN deployment, what is the primary role of the control plane?

To distribute endpoint reachability information, such as MAC and IP addresses, among VTEPs.

To provide a centralized management interface for configuring VXLAN tunnels.

To encrypt VXLAN traffic between VTEPs to ensure confidentiality.

To forward data packets between VTEPs based on the destination MAC address.

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 3Objective 1

VXLAN Control Planes JN0-683 Practice Questions (Page 5)

Part of the VXLAN domain, which makes up ~8% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~3–5 in this domain), expect 1–2 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)

26questions here

6free pages

7concepts

Questions 21–25

21foundation · easy
Which BGP EVPN route type is used to advertise the multicast group or ingress replication list for BUM traffic?
Select an answer first
22application · medium
A network engineer is configuring multicast-based VXLAN for a new tenant. The engineer has created a new VNI and needs to ensure that BUM traffic for this tenant is only sent to VTEPs that have ports in this VNI. What must be configured on the VTEPs?
Select an answer first
23foundation · easy
In BGP EVPN for VXLAN, what is the purpose of EVPN route type 2?
Select an answer first
24foundation · easy
In EVPN, which route type is responsible for advertising both MAC addresses and their associated IP addresses?
Select an answer first
25foundation · easy
In a VXLAN deployment, what is the primary role of the control plane?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-683

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.