Juniper NetworksCertified Professional, Data Center (JNCIP-DC)
Domain 4Objective 7
Configure, Monitor, or Troubleshoot EVPNs JN0-683 Practice Questions (Page 3)
Part of the EVPN-VXLAN Signaling domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 17 practice questions to prepare you well beyond it. (estimate)
17questions here
4free pages
6concepts
Questions 11–15
- 11
In an EVPN-VXLAN fabric, how do VTEPs learn MAC addresses from remote VTEPs?
Select an answer first - 12
Which Junos CLI command is used to verify the MAC address table on a VTEP, including MAC addresses learned via EVPN?
Select an answer first - 13
Which EVPN route type is used to advertise a broadcast, unknown-unicast, or multicast (BUM) service for a VXLAN VNI?
Select an answer first - 14
An EVPN-VXLAN fabric uses an IP prefix route to advertise a subnet that is not directly attached to any VTEP. Which EVPN route type is being used for this advertisement?
Select an answer first - 15
A VTEP is not receiving EVPN routes from its BGP peer. Which command would you use to check the BGP session state?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.