Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)
Domain 2Objective 8
Configure, Monitor, or Troubleshoot OSPF Interfaces and Neighbors JN0-364 Practice Questions (Page 6)
Part of the Open Shortest Path First (OSPF) domain, which makes up ~15% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–1 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)
32questions here
7free pages
12concepts
Questions 26–30
- 26
A network engineer is configuring OSPF on a Frame Relay network with multiple routers connected via a hub-and-spoke topology. The engineer wants to ensure that all routers can form adjacencies with each other without manual configuration of neighbors. Which OSPF network type should be configured on the interfaces?
Select an answer first - 27
What is the default OSPF dead interval on a broadcast network?
Select an answer first - 28
Which mismatch is a common cause of OSPF adjacency issues on Ethernet links?
Select an answer first - 29
A network engineer is configuring OSPF authentication between two routers in area 0. The engineer configures MD5 authentication on Router A with key ID 1 and password 'juniper123'. On Router B, the engineer configures MD5 authentication with key ID 2 and password 'juniper123'. The 'show ospf neighbor' command on Router A shows the neighbor in the Init state. What is the most likely cause of the adjacency failure?
Select an answer first - 30
Which configuration issue commonly prevents OSPF adjacency due to hello packets being ignored?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.