Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)
Domain 2Objective 8
Configure, Monitor, or Troubleshoot OSPF Interfaces and Neighbors JN0-364 Practice Questions (Page 4)
Part of the Open Shortest Path First (OSPF) domain, which makes up ~15% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–1 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)
32questions here
7free pages
12concepts
Questions 16–20
- 16
Which command displays the OSPF interface state and the configured parameters such as area, cost, and timers?
Select an answer first - 17
A network engineer is configuring OSPF authentication on a broadcast segment with multiple routers. The engineer configures MD5 authentication on Router A with key ID 1 and password 'juniper123'. On Router B, the engineer configures MD5 authentication with key ID 1 and password 'juniper456'. The 'show ospf neighbor' command on Router A shows the neighbor in the Init state. What is the most likely cause of the adjacency failure?
Select an answer first - 18
In the output of 'show ospf neighbor', which state indicates that the adjacency is fully operational?
Select an answer first - 19
A service provider is connecting two routers over a high-speed Ethernet link. The link is a direct point-to-point connection. The network engineer wants to ensure fast convergence in case of a link failure. The engineer configures the OSPF network type as point-to-point and sets the hello interval to 1 second and the dead interval to 4 seconds on both routers. After the configuration, the 'show ospf neighbor' command shows the neighbor in the Full state. Which additional configuration would further improve convergence time?
Select an answer first - 20
Which OSPF network type is typically used on Ethernet segments?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.