Install and Initialize a Dell Unity XT Storage System UNITY-DEPLOY Practice Questions (Page 4)

Questions 16–20

1. 16application · medium

   After initializing a Dell Unity XT system, an administrator wants to verify that both storage processors are active and communicating. What is the best way to check this?

   • ACheck the SP LEDs on the front of the system.
   • BCheck the system logs for any SP communication errors.
   • CPing the SP management IP addresses from a workstation.
   • DReview the SP status in Unisphere under the system health section.
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A Dell Unity XT 380 is being installed. The storage processors (SPs) have multiple 10GbE ports. The network team wants to ensure redundancy for management and data traffic. What is the recommended cabling practice?

   • AConnect only one SP to the network and leave the other SP unconnected to save ports.
   • BConnect all management ports to a single switch to simplify configuration.
   • CConnect each SP's management port to a different switch to provide redundancy.
   • DUse crossover cables to connect the SPs directly to each other for management.
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   Which networking prerequisite must be confirmed before installing a Dell Unity XT system?

   • AA DNS server configured with forward and reverse lookup zones
   • BA management network with available IP addresses and subnet information
   • CA fiber channel fabric with at least 16 Gb/s links
   • DA dedicated 10 GbE switch for each storage processor
   Reveal Solution Discussion Select an answer first
5. 19expert · hard

   A technician is rack mounting a Dell Unity XT 380. The rack is not deep enough for the system's rails. What is the best solution?

   • AExtend the rails using extension brackets.
   • BMount the system on a shelf instead of rails.
   • CPlace the system on the floor next to the rack.
   • DUse a different rack that is deep enough for the system.
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   After powering on a Dell Unity XT system, the administrator notices that one of the disk enclosure LEDs is amber. What should the administrator do first?

   • ACheck the Unisphere system health page for error details.
   • BReboot the system to clear the LED.
   • CIgnore the LED if the system is still operational.
   • DReplace the disk enclosure immediately.
   Reveal Solution Discussion Select an answer first