Install and Initialize a Dell Unity XT Storage System UNITY-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6expert · hard

   A company is installing a Dell Unity XT 480 in a data center that has a limited power budget. The system has dual power supplies, and the data center has two power feeds, but only one feed has enough capacity for the system. What is the best approach?

   • AConnect both power supplies to the feed with capacity and use a transfer switch.
   • BConnect one power supply to the feed with capacity and the other to a UPS on the same feed.
   • CConnect both power supplies to the feed with sufficient capacity.
   • DUpgrade the power infrastructure to support both feeds.
   Reveal Solution Discussion Select an answer first
2. 7expert · hard

   After initializing a Dell Unity XT system, the administrator notices that the system health page shows a warning for one of the disk enclosures. The warning is for a temperature sensor. What should the administrator do first?

   • AReplace the disk enclosure immediately.
   • BIgnore the warning if the system is still operational.
   • CCheck the ambient temperature and airflow around the rack.
   • DReboot the system to clear the warning.
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   What is the correct procedure for unpacking a Dell Unity XT system?

   • ACut the straps, open the box, and have two people lift it by the top cover
   • BRemove all packaging materials, then lift the system by its front handles
   • CTilt the box on its side and slide the system out onto the floor
   • DInspect the shipping container for damage, then remove the system using the provided lift tool
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   During initial configuration via Unisphere, which of the following is typically set?

   • AThe system name
   • BThe SNMP community string
   • CThe firmware version
   • DThe RAID level for all pools
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A Dell Unity XT 480 is being installed in a data center. The installation team has limited space and wants to place the system in a corner. What environmental factor is most important to consider?

   • AThe floor weight capacity to support the system's weight.
   • BThe availability of network ports on the nearest switch.
   • CThe proximity to a power outlet for easy cable connection.
   • DThe ambient temperature and airflow around the system.
   Reveal Solution Discussion Select an answer first