What is the recommended practice for connecting power to a Dell Unity XT system?

Connect both power supplies to the same PDU to simplify cable management

Connect each power supply to a separate PDU to provide redundancy

Connect power supplies only after all data cables are connected

Use a single power cable with a Y-splitter to connect both supplies

During initial configuration via Unisphere, the administrator needs to set the management IP address for the Unity XT system. What information is required to complete this step?

The hostname and DNS server addresses only.

The IP address, subnet mask, and default gateway for the management network.

The IP address of the storage network and the VLAN ID.

The MAC address of the SP and the serial number of the system.

A company is installing a Dell Unity XT 380 in a data center that has a raised floor with limited under-floor space. The installation team is concerned about cable management and airflow. They have the option to place the system in a rack that is not anchored to the floor. What is the best course of action?

Proceed with installation, ensuring cables are routed under the floor and the rack is stable.

Install the system without anchoring, but use a rack stabilizer bar.

Place the system on a shelf in the rack to avoid the need for rails.

Anchor the rack to the floor before installing the system.

After initialization, which of the following should be checked to confirm the system is fully operational?

The system is registered with Dell

The system logs for any errors or warnings

The physical connection of all cables

The firmware version is the latest available

Dell Unity Deploy

Domain 2Objective 1

Install and Initialize a Dell Unity XT Storage System UNITY-DEPLOY Practice Questions (Page 1)

Part of the Dell Unity XT and UnityVSA Installation and Service domain, which accounts for 10% of the UNITY-DEPLOY exam.

27questions here

6free pages

6concepts

10%of the exam

Questions 1–5

1foundation · easy
What is the recommended practice for connecting power to a Dell Unity XT system?
Select an answer first
2application · medium
During initial configuration via Unisphere, the administrator needs to set the management IP address for the Unity XT system. What information is required to complete this step?
Select an answer first
3foundation · easy
Which tool is used to perform the initial configuration of a Dell Unity XT system?
Select an answer first
4expert · hard
A company is installing a Dell Unity XT 380 in a data center that has a raised floor with limited under-floor space. The installation team is concerned about cable management and airflow. They have the option to place the system in a rack that is not anchored to the floor. What is the best course of action?
Select an answer first
5foundation · easy
After initialization, which of the following should be checked to confirm the system is fully operational?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to UNITY-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “UNITY-DEPLOY” is a trademark of its owner, used for identification only.

Install and Initialize a Dell Unity XT Storage System UNITY-DEPLOY Practice Questions (Page 1)

Questions 1–5

What is the recommended practice for connecting power to a Dell Unity XT system?

During initial configuration via Unisphere, the administrator needs to set the management IP address for the Unity XT system. What information is required to complete this step?

Which tool is used to perform the initial configuration of a Dell Unity XT system?

After initialization, which of the following should be checked to confirm the system is fully operational?

Keep studying — Dell Unity XT and UnityVSA Installation and Service