In a campus network, what is a typical use case for deploying VRRP?

To filter malicious traffic before it reaches end devices

To provide high availability for end devices' default gateway

To connect the campus network to the internet

To segment the network into multiple broadcast domains

A network engineer is setting up VRRP on two Dell PowerSwitch routers. They want to configure a virtual router with the IP address 192.168.1.1 as the default gateway for the subnet. Which component must be configured on both routers to achieve this?

The same physical IP address on both interfaces

Different virtual router IDs and the same virtual IP

A unique virtual MAC address on each router

The same virtual router ID and virtual IP address

A network engineer is deploying VRRP on a pair of Dell PowerSwitch routers. They want to ensure that if the master router loses connectivity to the upstream network, the backup router takes over. Which VRRP feature should they configure to achieve this?

Increasing the advertisement interval on the master

Setting a lower priority on the backup router

Using a different virtual IP address on each router

Tracking an upstream interface or route to adjust priority

Which scenario best illustrates a use case for VRRP in a campus network?

A router fails, but end devices continue to send traffic to the same default gateway IP without reconfiguration

End devices automatically receive new IP addresses when the DHCP server fails

Network traffic is encrypted between end devices and the gateway

A switch failure is automatically detected and the switch is replaced without manual intervention

What is the role of a backup router in a VRRP group?

To forward traffic in parallel with the master router

To provide DHCP services to end devices

To monitor the master router and take over if it fails

To assign the virtual IP address to the master router

Dell PowerSwitch Campus Deploy

Domain 2Objective 1

Identify the Components and Use Cases for Virtual Router Redundancy Protocol POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Part of the First Hop Redundancy Protocol-FHRP domain, which accounts for 11% of the POWERSWITCH-CAMPUS-DEPLOY exam.

20questions here

4free pages

3concepts

11%of the exam

Questions 6–10

6foundation · easy
In a campus network, what is a typical use case for deploying VRRP?
Select an answer first
7application · medium
A network engineer is setting up VRRP on two Dell PowerSwitch routers. They want to configure a virtual router with the IP address 192.168.1.1 as the default gateway for the subnet. Which component must be configured on both routers to achieve this?
Select an answer first
8expert · hard
A network engineer is deploying VRRP on a pair of Dell PowerSwitch routers. They want to ensure that if the master router loses connectivity to the upstream network, the backup router takes over. Which VRRP feature should they configure to achieve this?
Select an answer first
9foundation · easy
Which scenario best illustrates a use case for VRRP in a campus network?
Select an answer first
10foundation · easy
What is the role of a backup router in a VRRP group?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.