Which configuration element is required on both switches in an MLAG pair to establish the peer relationship?

A unique keepalive IP address on each switch

The same peer-link port-channel number

The same MLAG port-channel number for downstream links

What is the primary purpose of MLAG in a campus network?

To provide active-standby forwarding where only one switch forwards traffic at a time

To provide active-active forwarding for a downstream device connected to two switches

To provide redundancy for the management plane of the switch pair

To aggregate multiple links between two switches into a single logical link

What is the purpose of the keepalive link in an MLAG configuration?

To detect a failure of the peer switch

To provide a backup path for management traffic

To carry data traffic between the two switches

To synchronize the MAC address tables between the switches

What is a common cause of MLAG peer-link failure?

Incorrect keepalive IP address on one switch

Physical link failure or misconfiguration of the peer-link ports

VLAN inconsistency between the switches

Mismatched MLAG domain IDs on the two switches

What does the 'show mlag detail' command provide that 'show mlag' does not?

Information about the peer-link and keepalive status

Per-VLAN consistency information for MLAG

The MAC address table for the MLAG pair

A summary of the MLAG domain configuration

Dell PowerSwitch Campus Deploy

Domain 3Objective 3

Configure and Verify the Operation of the MLAG Solution POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Part of the IPv6 Stacking domain, which accounts for 11% of the POWERSWITCH-CAMPUS-DEPLOY exam.

14questions here

3free pages

4concepts

11%of the exam

Questions 6–10

6foundation · easy
Which configuration element is required on both switches in an MLAG pair to establish the peer relationship?
Select an answer first
7foundation · easy
What is the primary purpose of MLAG in a campus network?
Select an answer first
8foundation · easy
What is the purpose of the keepalive link in an MLAG configuration?
Select an answer first
9foundation · easy
What is a common cause of MLAG peer-link failure?
Select an answer first
10foundation · easy
What does the 'show mlag detail' command provide that 'show mlag' does not?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.