Configure and Verify the Operation of Stacking in OS6 POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   What is a key benefit of combining multiple Dell PowerSwitch OS6 switches into a single stack?

   • AIt increases the total number of available power supplies across the stack
   • BIt allows the switches to be managed as a single logical device with a unified configuration
   • CIt guarantees that all ports on all members operate at the same speed
   • DIt eliminates the need for any external cabling between the switches
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   An administrator is setting up a new OS6 stack and wants to assign member numbers 1, 2, and 3 to the three switches. They have connected the switches but have not yet powered them on. What is the correct order of operations?

   • APower on the switches, connect the stacking cables, and then assign member numbers.
   • BAssign member numbers before connecting the stacking cables, then power on.
   • CPower on all switches, then assign member numbers via the CLI.
   • DConnect the stacking cables, power on, and the stack will automatically assign numbers.
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   What is the default stack member number assigned to a standalone OS6 switch before it joins a stack?

   • A1
   • B0
   • CIt is randomly assigned
   • D255
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   Which of the following is a hardware prerequisite for stacking Dell PowerSwitch OS6 switches?

   • AA separate console connection for each switch
   • BA compatible stacking module or dedicated stacking ports on each switch
   • CAt least one 10GbE SFP+ port per switch
   • DA dedicated management VLAN
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   In an OS6 stack, what happens to the configuration when a new member joins?

   • AThe new member must be manually configured
   • BThe new member receives the stack configuration from the master
   • CThe new member keeps its own configuration
   • DThe configuration is merged between the master and the new member
   Reveal Solution Discussion Select an answer first